/live/media/A1/A1_262074_Fro.jpg)
Cardone 26-2074 Rack and Pinion Assembly
| Brand | Cardone 26-2074 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 16.13 |
| Distance Between Mounting Holes (mm) | 409.58 |
| E-Waste | No |
| Hose Port Type | Banjo/Washer |
| Input Shaft Diameter (in) | 0.68 |
| Input Shaft Diameter (mm) | 17.22 |
| Input Shaft Length (in) | 1.94 |
| Input Shaft Length (mm) | 49.20 |
| Number of Mounting Holes | 3 |
| Package Contents | Rack and Pinion, Instruction Sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 43.63 |
| Rack Length (mm) | 1108.08 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.34 |
| Thread Length (mm) | 59.44 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.94 |
| Product line | Rack and Pinion Assembly |
| Fits | Mazda · 5 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Aluminum housing. Lightweight construction with a protective coating to resist corrosion and rust.
Factory tested. Each unit is driven under extreme conditions to verify communication and operation.
Cross-references Mazda GS3L32110C and Mazda GS3L32960C for the same application. See all 2.
Cardone Electronic Power Steering Rack for Mazda 6
Restore steering response with this remanufactured Cardone rack and pinion assembly, part number 26-2074. It is built for 2009-2013 Mazda 6 applications and includes new tie rod ends, making it a direct-fit steering replacement for vehicles with electronic power steering.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for a precise vehicle fit
- Fits 2009-2013 Mazda 6, N/A
- Brand-new rubber sealing components replace worn seals to help control internal leakage
- Specialized lubricant applied during remanufacturing for extended service life
- Factory test drive performed under extreme operating conditions to verify on-car communications
- Protective black finish helps resist corrosion and rust
- Aluminum housing with polished micro-finish sleeves where applicable
- Includes rack and pinion assembly and instruction sheet
Product Details
Cardone Rack and Pinion Assembly 26-2074 is remanufactured to rigorous quality and performance standards for Mazda 6 steering systems. The unit is rebuilt with new spool valve seals and rack donut seals where applicable, then tested to confirm proper operation and communication with the vehicle’s electronic steering system. This part cross-references Mazda OE numbers GS3L32110C and GS3L32960C for the same application.
For 2009-2013 Mazda 6 owners searching for a remanufactured power steering rack, this assembly addresses worn internal components that can affect steering feel, fluid control, and return-to-center performance. The 43.63-inch rack length, 3 mounting holes, Banjo/Washer hose ports, and M14 x 1.5 pressure port thread size support accurate replacement matching.
Common Steering Problems This Part Can Address
- Hard steering during the first few minutes of driving
- Internal fluid bypass caused by worn rack seals
- Power steering pump noise related to air in the system after repair
- Steering that does not return to center after a turn
- Excessive play or inconsistent steering response in a Mazda 6
Installation Notes
- Fits 2009-2013 Mazda 6, N/A
- Install an in-line filter and use OE fluid
- Flush the hydraulic power steering system during installation
- Bleed the steering system completely to remove air and reduce pump whine
- Check front-end alignment and inspect return line routing if steering does not return to center
Quality Assurance
Each Cardone electronic power steering rack and pinion assembly is remanufactured using premium replacement components and tested to verify performance under demanding conditions. The process replaces all rubber sealing components and uses a protective coating to help maintain durability in service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2013 | Mazda | 6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2012 | Mazda | 6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2011 | Mazda | 6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Mazda | 6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Mazda | 6 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||