/live/media/A1/A1_262122E_Fro.jpg)
Cardone 26-2122E Rack and Pinion Assembly
| Brand | Cardone 26-2122E |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 11.50 |
| Distance Between Mounting Holes (mm) | 292.10 |
| E-Waste | Yes |
| Hose Port Type | Banjo |
| Input Shaft Diameter (in) | 0.73 |
| Input Shaft Diameter (mm) | 18.52 |
| Input Shaft Length (in) | 1.13 |
| Input Shaft Length (mm) | 28.58 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and pinion, instruction sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 48.75 |
| Rack Length (mm) | 1238.25 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.68 |
| Thread Length (mm) | 68.05 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 2.625 |
| Product line | Rack and Pinion Assembly |
| Fits | Ford · 4 vehicles |
Remanufactured OE replacement. Built to restore original fit and performance.
Aluminum construction. Lightweight housing with a protective finish to resist corrosion.
Factory-tested. Simulates extreme conditions and verifies on-car communications.
Cross-references Ford F6DZ3280BA and Ford F6DZ3504EE for the same application. See all 2.
Electronic Power Steering Rack for Taurus
Restore precise steering response with this remanufactured CARDONE rack and pinion assembly. Built for 1996-1999 Ford Taurus applications with hydraulic power steering, this unit is engineered for direct OE-style fit and dependable on-road performance.
Part number 26-2122E is remanufactured with new premium wear components, including rubber sealing parts, and finished with a protective coating to help resist corrosion. It also includes inner tie rods and is supplied with an Electronic Variable Orifice (EVO) component for the listed Ford Taurus fitment.
Key Features
- Remanufactured CARDONE rack and pinion assembly for Ford Taurus steering repair
- Fits 1996-1999 Ford Taurus, N/A
- Part number 26-2122E
- Includes inner tie rods and EVO component for the listed application
- All rubber sealing components replaced during remanufacturing
- Specialized lubricant applied for extended service life
- Factory test drive verifies operation under demanding conditions and checks on-car communications
- Protective coating helps resist rust and corrosion
- Aluminum housing with black finish
- Banjo hose port type with M16 x 1.5 pressure and return ports
Product Details
CARDONE’s Rack and Pinion Assembly line focuses on remanufactured OE-style steering components built to match vehicle fitment requirements. For the Ford Taurus, this 26-2122E rack and pinion assembly is remanufactured to rigorous standards and uses brand-new premium components where wear items are replaced. The result is a steering gear built for accurate response, stable hydraulic operation, and consistent communication with the vehicle’s steering system.
This part cross-references Ford F6DZ3280BA and F6DZ3504EE for the same application.
Common Steering Issues This Part May Address
- Hard steering during the first few minutes of driving
- Internal fluid bypass caused by worn spool valve seals or rack seals
- Steering that does not return to center after a turn
- Power steering pump whine caused by air in the system after service
- Leaks from worn sealing components in the rack and pinion assembly
Installation Notes and Tips
For 1996-1999 Ford Taurus, the notes specify hydraulic power steering, an EVO component, and inner tie rods. CARDONE recommends installing an in-line filter for warranty purposes, using the suggested OE fluid, and flushing the system thoroughly before operation. If the steering does not return to center after installation, inspect front-end alignment and check the return line for restriction or kinking.
Quality Assurance
Each unit is factory tested under simulated extreme operating conditions to verify performance and on-car communication. The remanufacturing process also reduces energy and raw material use compared with producing a new part, while the finished coating and replaced sealing components support long-term durability.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 1999 | Ford | Taurus | SHO | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1998 | Ford | Taurus | SHO | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1997 | Ford | Taurus | SHO | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 1996 | Ford | Taurus | SHO | N/A | Supplied with Electronic Variable Orifice (EVO) Component; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | |||||