/live/media/A1/A1_262154_Fro.jpg)
Cardone 26-2154 Rack and Pinion Assembly
| Brand | Cardone 26-2154 |
|---|---|
| Casting Material | Steel; aluminum |
| Distance Between Mounting Holes (in) | 11.31 |
| Distance Between Mounting Holes (mm) | 287.35 |
| E-Waste | No |
| Hose Port Type | Banjo/washer |
| Input Shaft Diameter (in) | 0.75 |
| Input Shaft Diameter (mm) | 19.05 |
| Input Shaft Length (in) | 3.19 |
| Input Shaft Length (mm) | 80.95 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and pinion, instruction sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 50.75 |
| Rack Length (mm) | 1289.05 |
| Return Port Thread Size | M17 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.09 |
| Thread Length (mm) | 53.14 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.19 |
| Product line | Rack and Pinion Assembly |
| Fits | Mitsubishi · 3 vehicles |
Remanufactured OE replacement. Built to rigorous quality and performance standards for dependable steering.
Factory test driven. Simulates extreme operating conditions while verifying on-car communications.
New sealing components. All rubber seals are replaced to help eliminate internal leaks.
Cross-references Mitsubishi 4410A011 for the same application. See all 1.
Remanufactured Steering Rack for Lancer
Restore precise steering response with this remanufactured CARDONE rack and pinion assembly. Built for the 2008 Mitsubishi Lancer with hydraulic power steering, Part Number 26-2154 is remanufactured with new sealing components and tested under simulated driving conditions for dependable operation.
Cardone’s rack and pinion product line focuses on OE-style fit and remanufactured durability, using premium replacement components and a factory test drive process to verify performance and on-car communication.
Key Features
- Fits 2008 Mitsubishi Lancer, hydraulic power steering
- Remanufactured Original Equipment-style fit for direct replacement
- New spool valve seals and rack donut seals installed where applicable
- Specialized lubricant applied for extended service life
- Protective coating helps resist corrosion and rust
- Steel and aluminum casting materials
- Tie rod ends included
- Banjo/washer hose port type with M16 x 1.5 pressure port and M17 x 1.5 return port
- Rack length: 50.75 in. Total turns lock to lock: 3.19
Product Details
The CARDONE 26-2154 rack and pinion assembly is remanufactured to rigorous quality and performance standards for the 2008 Mitsubishi Lancer. It includes inner tie rods and is finished in black with a protective coating. The unit is factory tested under extreme operating conditions to confirm steering function and communication, while all rubber sealing components are replaced to help reduce internal leakage and maintain consistent steering feel.
This part cross-references Mitsubishi 4410A011 for the same application.
Common Steering Issues This Part May Address
- Excessive steering play or loose steering feel
- Internal rack leakage causing fluid loss
- Hard steering after startup or during low-speed maneuvering
- Steering that does not return smoothly to center
- Noise or whine related to worn rack seals or internal bypass
Installation Notes
For 2008 Mitsubishi Lancer rack and pinion replacement, inspect the front-end alignment, power steering fluid condition, and return line routing before installation. The system should be bled completely after service to remove air, and a filter plus the suggested OE fluid are recommended for warranty purposes. Verify mounting dimensions, input shaft size, and port thread specifications before installation.
Quality Assurance
Each CARDONE remanufactured rack and pinion assembly undergoes a factory test drive that simulates demanding road conditions while checking on-car communications. The remanufacturing process also reduces energy and raw material use compared with producing a new part, supporting a more resource-efficient repair.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2008 | Mitsubishi | Lancer | ES | N/A | Puerto Rico; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2008 | Mitsubishi | Lancer | DE | N/A | Puerto Rico; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2008 | Mitsubishi | Lancer | GTS | N/A | Puerto Rico; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | |||||