/live/media/A1/A1_262416_Fro.jpg)
Cardone 26-2416 Rack and Pinion Assembly
| Brand | Cardone 26-2416 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 3.56 |
| Distance Between Mounting Holes (mm) | 90.50 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.71 |
| Input Shaft Diameter (mm) | 18.01 |
| Input Shaft Length (in) | 3.13 |
| Input Shaft Length (mm) | 79.38 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 43.81 |
| Rack Length (mm) | 1112.85 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.00 |
| Thread Length (mm) | 50.80 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.06 |
| Product line | Rack and Pinion Assembly |
| Fits | Kia and Hyundai · 11 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Factory-tested. Each unit is driven under extreme conditions to verify on-car communications.
New sealing components. Fresh seals and specialized lubricant help reduce leaks and extend service life.
Cross-references Hyundai 577001F000, Kia 577001F000 and Kia 577242E000 for the same application. See all 3.
Remanufactured Steering Rack for Tucson and Sportage
The Cardone 26-2416 rack and pinion assembly is a remanufactured electronic power steering unit built for precise OE-style fit and dependable steering response. It is engineered for select Hyundai Tucson and Kia Sportage applications, with new sealing components, specialized lubricant, and factory testing to verify performance.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for accurate fitment
- Fits 2005-2010 Kia Sportage, N/A
- Fits 2005-2008 Hyundai Tucson, N/A
- Fits 2009 Hyundai Tucson, N/A, before 04/01/2009
- New spool valve seals and rack donut seals installed where applicable
- Specialized lubricant applied for extended service life
- Factory test drive performed to simulate operating conditions and verify on-car communications
- Black steering rack with steel and aluminum construction
- Includes tie rod ends, sealing kit, and instruction sheet
Product Details
Cardone’s Rack and Pinion Assembly line focuses on remanufactured steering components that restore factory-style operation without changing the vehicle’s original steering geometry. Part number 26-2416 uses O-ring hose ports, M16 x 1.5 pressure and return threads, a 43.81-inch rack length, and a 3.06 lock-to-lock turn ratio. The unit is finished with a protective coating to help resist corrosion, and all rubber sealing components are replaced during remanufacturing. This part cross-references Hyundai 577001F000 and Kia 577001F000.
Common Steering Issues It Can Address
- Hard steering during the first few minutes of driving
- Power steering pump whine caused by air in the hydraulic system
- Steering that does not return to center after a turn
- Internal fluid bypass from worn spool valve seals or rack seals
- Morning sickness symptoms caused by wear in the rack housing
Installation Notes
For warranty validation on listed applications, install an in-line filter, use OE-specified fluid, and flush the hydraulic power steering system during installation. On the 2009 Hyundai Tucson, the fitment note applies before 04/01/2009 and includes inner tie rods. If the steering does not return to center after installation, check front-end alignment and inspect the return line for restriction or kinks.
Quality Assurance
Each Cardone 26-2416 rack and pinion assembly undergoes a factory test drive under simulated extreme conditions to confirm operation and communication on the vehicle. The remanufacturing process also reduces energy and raw material use compared with producing a new part, while replacing worn sealing components and applying protective finishes for durability.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Kia | Sportage | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Hyundai | Tucson | N/A | Before 04/01/2009; Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Kia | Sportage | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Hyundai | Tucson | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Kia | Sportage | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Hyundai | Tucson | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Kia | Sportage | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Hyundai | Tucson | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Kia | Sportage | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Hyundai | Tucson | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Kia | Sportage | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||