/live/media/A1/A1_262418_Fro.jpg)
Cardone 26-2418 Rack and Pinion Assembly
| Brand | Cardone 26-2418 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 3.63 |
| Distance Between Mounting Holes (mm) | 92.08 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.75 |
| Input Shaft Diameter (mm) | 19.10 |
| Input Shaft Length (in) | 5.786 |
| Input Shaft Length (mm) | 146.96 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 42.75 |
| Rack Length (mm) | 1085.85 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.09 |
| Thread Length (mm) | 53.04 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.25 |
| Product line | Rack and Pinion Assembly |
| Fits | Hyundai · 5 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise, direct replacement.
Factory-tested performance. Each unit is road-tested to verify operation under demanding conditions.
Corrosion-resistant finish. Protective coating helps guard against rust for longer service life.
Cross-references Hyundai 577003K030, Hyundai 577003K220 and Hyundai 577243K500 for the same application. See all 3.
Remanufactured Steering Rack for Hyundai Sonata
Restore precise steering response with this remanufactured Cardone rack and pinion assembly for select Hyundai Sonata models. Built for 2006-2010 Hyundai Sonata applications, Cardone 26-2418 is remanufactured with new sealing components, specialized lubricant, and factory testing to verify operation under demanding conditions.
Key Features
- Fits 2006-2010 Hyundai Sonata
- Cardone Rack and Pinion Assembly, part number 26-2418
- Remanufactured OE-style replacement for proper vehicle fit
- New spool valve seals and rack donut seals installed where applicable
- 100% replacement of rubber sealing components
- Factory test drive verifies performance and on-car communications
- Protective coating helps resist corrosion and rust
- Steel and aluminum construction with black finish
- Includes rack and pinion, sealing kit, and instruction sheet
- Tie rod ends included
Product Details
Cardone’s Electronic Power Steering Rack and Pinion line is remanufactured to OE-level fit and function using premium replacement components. For this Hyundai Sonata rack and pinion assembly, the housing is cleaned and refinished, rubber sealing parts are replaced, and specialized lubricant is applied to support long-term operation. The unit is factory tested to simulate extreme driving conditions and confirm communication and performance before it leaves the remanufacturing process. This part cross-references Hyundai OE numbers 577003K030 and 577003K220 for the same application. Part number 26-2418 is a direct-fit steering rack solution for 2006-2010 Hyundai Sonata vehicles requiring an O-ring hose port setup, M14 x 1.5 pressure port, and M16 x 1.5 return port.
Common Steering Issues Addressed
- Excessive steering play or loose steering feel
- Fluid leakage from rack seals or housing
- Hard steering after startup or during operation
- Steering that does not return to center correctly after a turn
- Noise or poor response from a worn rack and pinion assembly
Installation Notes
Fits 2006-2010 Hyundai Sonata, N/A. Install an in-line filter and use OE fluid. Flush the hydraulic power system when installing the rack and pinion assembly with inner tie rods for warranty validation. Verify alignment, hose routing, and return line condition during installation to help prevent steering concerns after service. Part number 26-2418 is supplied with tie rod ends included and a sealing kit for service preparation.
Quality Assurance
Each Cardone remanufactured rack and pinion assembly is processed to rigorous quality and performance standards, then factory test driven to confirm operation under real-world conditions. The remanufacturing process also reduces energy and raw material use compared with producing a new part.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Hyundai | Sonata | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Hyundai | Sonata | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Hyundai | Sonata | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Hyundai | Sonata | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Hyundai | Sonata | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||