/live/media/A1/A1_262421_Fro.jpg)
Cardone 26-2421 Rack and Pinion Assembly
| Brand | Cardone 26-2421 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 3.56 |
| Distance Between Mounting Holes (mm) | 90.50 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.71 |
| Input Shaft Diameter (mm) | 18.01 |
| Input Shaft Length (in) | 2.00 |
| Input Shaft Length (mm) | 50.80 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M14 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 41.25 |
| Rack Length (mm) | 1047.75 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.00 |
| Thread Length (mm) | 50.80 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.13 |
| Product line | Rack and Pinion Assembly |
| Fits | Dodge and Hyundai · 12 vehicles |
Remanufactured OE part. Built to restore original fit and performance with factory-tested communications.
New sealing components. Fresh seals and specialized lubricant help reduce leaks and extend service life.
Corrosion-resistant finish. Protective coating helps guard the steering rack against rust.
Cross-references Dodge 577001E000, Hyundai 577001E000 and Hyundai 577001E050 for the same application. See all 5.
Remanufactured Steering Rack for Accent and Attitude
Restore precise steering response with this remanufactured Cardone Rack and Pinion Assembly, part number 26-2421. It is built for 2006-2011 Dodge Attitude and 2006-2011 Hyundai Accent applications, with OE-style fitment and electronic power steering communication checks performed during testing.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for direct vehicle fit
- Brand-new rubber sealing components, including spool valve seals and rack donut seals where applicable
- Specialized lubricant applied to support longer service life
- Factory test drive process verifies operation under demanding conditions and checks on-car communications
- Protective coating helps resist corrosion and rust
- Steel and aluminum construction with black finish
- Includes rack and pinion, sealing kit, and instruction sheet
- Part number 26-2421 for Hyundai Accent and Dodge Attitude steering repair
Product Details
Cardone 26-2421 is a remanufactured electronic power steering rack and pinion assembly engineered for 2006-2011 Hyundai Accent and 2006-2011 Dodge Attitude models. The unit uses O-ring hose ports, M14 x 1.5 pressure port threads, M16 x 1.5 return port threads, and a 41.25-inch rack length. It also features a 3.13 lock-to-lock turn ratio, 2 mounting holes, and tie rod ends included for the listed applications. This part cross-references OE-style numbers used for the same application, including Hyundai 577001E000 and 577001E050.
Common Repair Symptoms
- Hard steering during the first few minutes of driving
- Power steering pump whine caused by air trapped in the hydraulic system
- Steering wheel not returning to center after a turn
- Internal bypass or leakage in the rack and pinion assembly
- Morning stiffness in steering effort that improves as the unit warms up
Installation Notes
- Fits 2006-2011 Dodge Attitude, N/A
- Fits 2006-2011 Hyundai Accent, N/A
- Install an in-line filter and use OE fluid for the listed applications
- Flush the hydraulic power steering system during installation
- Bleed the steering system completely to remove air and reduce pump noise
- Check front-end alignment and inspect the return line if steering does not self-center
Quality Assurance
Each Cardone rack and pinion assembly is remanufactured to rigorous quality and performance standards, then factory test driven to confirm operation under extreme conditions. All rubber sealing components are replaced, and the remanufacturing process reduces energy and raw material use compared with producing a new part.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Dodge | Attitude | 1.6L | L4 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2011 | Hyundai | Accent | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Dodge | Attitude | 1.6L | L4 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Hyundai | Accent | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Dodge | Attitude | 1.6L | L4 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Hyundai | Accent | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Dodge | Attitude | 1.6L | L4 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Hyundai | Accent | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Dodge | Attitude | 1.6L | L4 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Hyundai | Accent | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Dodge | Attitude | 1.6L | L4 | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Hyundai | Accent | — | — | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||||