/live/media/A1/A1_262424_Fro.jpg)
Cardone 26-2424 Rack and Pinion Assembly
| Brand | Cardone 26-2424 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 0.00 |
| Distance Between Mounting Holes (mm) | 0.00 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.79 |
| Input Shaft Diameter (mm) | 19.96 |
| Input Shaft Length (in) | 1.57 |
| Input Shaft Length (mm) | 39.93 |
| Number of Mounting Holes | 1 |
| Package Contents | Rack and Pinion, Sealing Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 46.75 |
| Rack Length (mm) | 1187.45 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 1.73 |
| Thread Length (mm) | 44.02 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.63 |
| Product line | Rack and Pinion Assembly |
| Fits | Kia · 4 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Factory-tested. Each unit is driven through extreme conditions to verify on-car communications.
New seals and lubricant. Fresh rubber sealing components and specialized lubricant help extend service life.
Cross-references Kia 577103E000 for the same application. See all 1.
Remanufactured Steering Rack for Sorento
Restore precise steering response with this remanufactured Cardone Rack and Pinion Assembly, part number 26-2424. It is built for 2003-2006 Kia Sorento applications and includes tie rod ends, a sealing kit, and an instruction sheet for a direct replacement service.
Cardone’s Electronic Power Steering Rack and Pinion line focuses on OE-style fit, tested operation, and renewed sealing components for dependable steering performance in the Kia Sorento.
Key Features
- Remanufactured Original Equipment-style rack and pinion assembly for exact vehicle fit
- Brand-new spool valve seals and rack donut seals installed where applicable
- Specialized lubricant applied to support longer service life
- Factory test drive performed to verify operation under demanding conditions
- Protective coating helps resist corrosion and rust
- Steel and aluminum casting materials
- O-ring hose ports with M16 x 1.5 pressure and return threads
- Black finish with tie rod ends included
Product Details
Cardone 26-2424 is a remanufactured rack and pinion assembly engineered for 2003-2006 Kia Sorento steering systems. The unit measures 46.75 inches in rack length, uses a 0.79-inch input shaft diameter, and has a total lock-to-lock travel of 3.63 turns. It is built to replace the original steering gear with OE-style dimensions and communication checks performed during factory testing. This part cross-references Kia 577103E000 for the same application.
Common Steering Issues It Can Address
- Hard steering during the first few minutes of driving
- Power steering pump whine caused by air in the hydraulic system
- Steering that does not return to center after a turn
- Internal fluid bypass from worn rack seals or spool valve seals
- Morning sickness symptoms that improve as the housing warms up
Installation Notes
For 2003-2006 Kia Sorento installation, use an in-line filter and OE fluid, and flush the hydraulic power steering system during service. Check front-end alignment after installation, and inspect the return line for kinks or restrictions if steering does not return to center. Bleed the system completely to remove trapped air.
Quality Assurance
Each Cardone Electronic Power Steering Rack and Pinion is remanufactured to rigorous quality and performance standards, then factory test driven to confirm operation under extreme conditions. The process replaces all rubber sealing components and uses renewed internal sealing surfaces and lubricant to support reliable steering performance in the Kia Sorento.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2006 | Kia | Sorento | LX | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Kia | Sorento | LX | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2004 | Kia | Sorento | LX | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2003 | Kia | Sorento | LX | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | |||||