/live/media/A1/A1_262437_Fro.jpg)
Cardone 26-2437 Rack and Pinion Assembly
| Brand | Cardone 26-2437 |
|---|---|
| Casting Material | Steel; aluminum |
| Distance Between Mounting Holes (in) | 6.63 |
| Distance Between Mounting Holes (mm) | 168.40 |
| E-Waste | No |
| Hose Port Type | O-ring |
| Input Shaft Diameter (in) | 0.79 |
| Input Shaft Diameter (mm) | 19.96 |
| Input Shaft Length (in) | 1.38 |
| Input Shaft Length (mm) | 34.93 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and pinion, sealing kit, instruction sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 46.75 |
| Rack Length (mm) | 1187.45 |
| Return Port Thread Size | M16 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 1.73 |
| Thread Length (mm) | 44.02 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.69 |
| Product line | Rack and Pinion Assembly |
| Fits | Kia · 3 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Factory-tested assembly. Each unit is driven under extreme conditions to verify on-car communications.
New sealing components. Rubber seals are replaced and specialized lubricant is applied for longer life.
Cross-references Kia 577103E200, Kia 577313E010 and Kia 577323E010 for the same application. See all 3.
Remanufactured Steering Rack for Kia Sorento
Cardone 26-2437 is a remanufactured electronic power steering rack and pinion assembly built for 2007-2009 Kia Sorento applications. It is rebuilt with new premium components, tested under simulated driving conditions, and finished for corrosion resistance to support consistent steering performance.
Key Features
- Remanufactured Original Equipment-style fit for the Kia Sorento
- New spool valve seals and rack donut seals installed where applicable
- 100% replacement of rubber sealing components
- Specialized lubricant applied for extended service life
- Factory test drive verifies operation and on-car communications
- Protective coating helps resist rust and corrosion
- Includes rack and pinion, sealing kit, and instruction sheet
- Black steering rack with steel and aluminum casting material
Product Details
This Cardone Rack and Pinion Assembly, part number 26-2437, is engineered for direct replacement in 2007-2009 Kia Sorento models. The unit uses O-ring hose ports, M16 x 1.5 pressure and return threads, a 46.75-inch rack length, and a 3.69 lock-to-lock ratio. Cardone’s remanufacturing process replaces sealing components, applies specialized lubricant, and verifies performance through factory testing to help restore steering response and communication.
Cardone’s Rack and Pinion Assembly line focuses on remanufactured steering components that match OE fit and function. For buyers searching for a 2007 Kia Sorento rack and pinion assembly, 2008 Kia Sorento steering rack replacement, or 2009 Kia Sorento electronic power steering rack, this part number 26-2437 is built for those exact applications.
Common Problems This Part Addresses
- Hard steering during the first few minutes of driving
- Internal fluid leaks from worn rack seals
- Steering noise caused by air in the hydraulic system after replacement
- Steering that does not return to center due to rack or system issues
- Morning sickness symptoms from worn spool valve sealing surfaces
Installation Notes
Fits 2007-2009 Kia Sorento, N/A. Install an in-line filter and use OE fluid. Flush the hydraulic power steering system during installation for warranty validation. Check front-end alignment and inspect the return line for restriction or kinks if steering does not return to center. Bleed the system completely after installation to remove air.
Quality Assurance
Each Cardone 26-2437 rack and pinion assembly is remanufactured to rigorous quality and performance standards, then factory test driven to confirm operation under demanding conditions. Rubber sealing components are replaced, and the unit is finished with a protective coating to support durability and long-term reliability.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2009 | Kia | Sorento | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Kia | Sorento | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Kia | Sorento | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||