/live/media/A1/A1_262632_Fro.jpg)
Cardone 26-2632 Rack and Pinion Assembly
| Brand | Cardone 26-2632 |
|---|---|
| Casting Material | Steel; Aluminum |
| Distance Between Mounting Holes (in) | 19.13 |
| Distance Between Mounting Holes (mm) | 485.78 |
| E-Waste | No |
| Hose Port Type | O-Ring |
| Input Shaft Diameter (in) | 0.75 |
| Input Shaft Diameter (mm) | 18.95 |
| Input Shaft Length (in) | 1.94 |
| Input Shaft Length (mm) | 49.20 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Installation Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | Remanufactured |
| Rack Length (in) | 44.75 |
| Rack Length (mm) | 1136.65 |
| Return Port Thread Size | M17 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.34 |
| Thread Length (mm) | 59.44 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.19 |
| Product line | Rack and Pinion Assembly |
| Fits | Toyota · 8 vehicles |
Remanufactured OE part. Built to original equipment standards for a precise fit and dependable performance.
Factory-tested. Each unit is driven under extreme conditions to verify communication and operation.
New sealing components. Fresh seals and specialized lubricant help reduce leaks and extend service life.
Cross-references Toyota 4425007100, Toyota 4425007101 and Toyota 4550309420 for the same application. See all 4.
Remanufactured Steering Rack for Avalon
Restore precise steering response with this remanufactured Cardone rack and pinion assembly for select Toyota Avalon models. Built for 2005-2012 Toyota Avalon applications, Cardone 26-2632 is rebuilt with new premium components and tested to verify on-car communication and performance under demanding conditions.
Key Features
- Remanufactured Original Equipment-style fit for select Toyota Avalon vehicles
- New spool valve seals and rack donut seals installed where applicable
- 100% replacement of rubber sealing components
- Specialized lubricant applied for extended service life
- Protective coating helps resist corrosion and rust
- Factory test drive checks operation under extreme conditions
- Includes rack and pinion, installation kit, and instruction sheet
- Black steering rack housing with steel and aluminum construction
Product Details
Cardone 26-2632 is a remanufactured electronic power steering rack and pinion assembly engineered for select Toyota Avalon models from 2005 through 2012. The unit uses O-ring hose ports, M16 x 1.5 pressure port threads, M17 x 1.5 return port threads, and a 19.13-inch mounting-hole spacing. It also features tie rod ends included, a 44.75-inch rack length, and 3.19 total turns lock to lock. This part cross-references Toyota OE numbers 4425007100 and 4550309420 for the same application.
For drivers searching for a Toyota Avalon rack and pinion assembly, Toyota Avalon steering rack replacement, or a remanufactured power steering rack for 2005-2012 Toyota Avalon, this part number 26-2632 provides a direct-fit service solution built around OE specifications.
What It Helps Address
- Steering play or looseness in the front end
- Internal hydraulic leakage in the rack assembly
- Hard steering after startup or during low-speed maneuvering
- Power steering fluid seepage at seals or ports
- Steering response that feels inconsistent or delayed
Installation Notes
Fits 2005-2012 Toyota Avalon, N/A. Install an in-line filter and use OE fluid; flush the hydraulic power steering system when installing the rack and pinion assembly with inner tie rods for warranty validation. Bleed the steering system completely after installation to remove air and reduce pump noise. If the vehicle does not return to center, inspect front-end alignment and check the return line for restriction or kinks.
Quality Assurance
Each Cardone rack and pinion assembly undergoes a factory test drive that simulates extreme operating conditions while verifying on-car communications. The remanufacturing process replaces rubber sealing components, uses specialized lubricant, and applies a protective finish to support durability and corrosion resistance. Cardone also notes that its remanufacturing process reduces the energy and raw material needed to produce a new part by 80%.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2011 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2010 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2009 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2008 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2007 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2006 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| 2005 | Toyota | Avalon | N/A | Install in-line filter and use OE fluid; flush hydraulic power system when installing Rack and Pinion Assembly with inner tie rods for warranty validation.; Rack and Pinion Assembly |
| No rows match your filter. | ||||