/live/media/A1/A1_2C2743_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 2C-2743 Disc Brake Caliper - Rear Left
| Brand | Cardone 2C-2743 |
|---|---|
| Position | Rear Left |
| Pad Wear Sensor Included | Yes |
| Mounting Hardware Included | Yes |
| Bracket Included | Yes |
| Grade Type | Regular |
| Pads Included | No |
| Caliper Casting Material | Cast iron |
| Mounting Bolt Included | No |
| Bleeder Screw Included | Yes |
| Anti-Rattle Spring Included | No |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Caliper Type | Floating |
| Piston Diameter | 1.19 |
| Piston Diameter | 30.1 |
| Inlet Fitting Type | Banjo |
| Caliper Color | Silver |
| Mounting Hole Diameter | 0.394 |
| Abutment Clips Included | Yes |
| Mounting Bracket Included | Yes |
| Piston Material | Steel |
| Bleeder Screw Quantity | 1 |
| Caliper Finish | Zinc plated |
| Bleeder Thread Size | M7x1.0 |
| Contains Electronic Components | No |
| Does it require SDS | No |
| E-Waste | No |
| FAA_A1 | Not recommended. the o.e. manufacturers specified steel or phenol |
| FAA_A2 | As a rule, always use brake fluid recommended by o.e. the fluid t |
| FAA_A5 | A symptom of a low brake pedal is usually caused by air in the sy |
| FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
| Product line | New Brake Caliper |
| Fits | Mazda · 5 vehicles |
Direct-fit replacement. Hassle-free installation with a bracket and hardware kit included.
Zinc plated finish. Helps resist rust for longer-lasting reliability.
Floating caliper design. Delivers smooth, consistent braking performance.
Cross-references BK1T2671XA and BKZT2699Z for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Rear Left Brake Caliper for Mazda Protege
Restore consistent rear braking with this Cardone New Brake Caliper, part number 2C-2743. It is a direct-fit rear left disc brake caliper for select 2001-2003 Mazda Protege and 2002-2003 Mazda Protege5 applications, built for smooth operation and dependable replacement performance.
- Fits 2001-2003 Mazda Protege, rear left
- Fits 2002-2003 Mazda Protege5, rear left
- Cardone New Brake Caliper, part number 2C-2743
- Floating caliper design with 1.19 in. / 30.1 mm piston diameter
- Cast iron caliper body with steel piston
- Zinc plated finish with silver color and rust resistant coating
- Pad wear sensor included
- Mounting hardware, bracket, abutment clips, bleeder screw, and caliper slides included
- Banjo inlet fitting and M10x1.0 inlet port size
Product Details
Cardone’s New Brake Caliper line focuses on direct-fit replacement parts manufactured with controlled quality processes for consistent braking performance. This 2C-2743 caliper is built as a floating rear caliper with a single steel piston, zinc plating for corrosion resistance, and the hardware needed for installation where specified by the application. It is a practical replacement for a worn or sticking rear left caliper on Mazda Protege and Mazda Protege5 models.
This part cross-references Monroe Shocks & Struts (e.g., BK1T2671XA, BKZT2699Z) for the same application.
Common Brake Issues It Can Address
- Rear brake drag caused by a sticking caliper piston or slide
- Uneven braking from a worn or seized rear left caliper
- Brake warning concerns related to pad wear sensor service
- Corrosion-related caliper movement problems on the rear axle
- Reduced braking consistency from a failing hydraulic caliper assembly
Installation Notes
Verify rear left fitment before installation on your Mazda Protege or Mazda Protege5. Use the correct brake fluid specified by the vehicle manufacturer, and inspect the brake hose, pads, and rotor condition during service. Floating caliper mounting pins should be lubricated with silicone grease, and the system should be bled after installation to remove air from the hydraulic circuit.
Quality Assurance
This Cardone New Brake Caliper is manufactured as a new replacement component using stringent quality processes for consistent operation. The zinc-coated finish and included service hardware support long-term reliability in everyday driving conditions.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2003 | Mazda | Protege | 2.0L | L4 | Rear Left | New Brake Caliper |
| 2003 | Mazda | Protege5 | — | — | Rear Left | New Brake Caliper |
| 2002 | Mazda | Protege | — | — | Rear Left | New Brake Caliper |
| 2002 | Mazda | Protege5 | — | — | Rear Left | New Brake Caliper |
| 2001 | Mazda | Protege | — | — | Rear Left | New Brake Caliper |
| No rows match your filter. | ||||||