/live/media/A1/A1_2C3945_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 2C-3945 Disc Brake Caliper - Rear Left
| Brand | Cardone 2C-3945 |
|---|---|
| Position | Rear Left |
| Pad Wear Sensor Included | Yes |
| Mounting Hardware Included | Yes |
| Bracket Included | Yes |
| Grade Type | Regular |
| Pads Included | No |
| Caliper Casting Material | Cast iron |
| Mounting Bolt Included | No |
| Bleeder Screw Included | Yes |
| Anti-Rattle Spring Included | Yes |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Caliper Type | Floating |
| Piston Diameter | 1.33 |
| Piston Diameter | 33.86 |
| Inlet Fitting Type | Inverted flare |
| Caliper Color | Silver |
| Mounting Hole Diameter | 0.394 |
| Abutment Clips Included | Yes |
| Mounting Bracket Included | Yes |
| Piston Material | Steel |
| Bleeder Screw Quantity | 1 |
| Caliper Finish | Zinc plated |
| Bleeder Thread Size | M10x1.25 |
| Contains Electronic Components | No |
| Does it require SDS | No |
| E-Waste | No |
| FAA_A1 | Not recommended. the o.e. manufacturers specified steel or phenol |
| FAA_A2 | As a rule, always use brake fluid recommended by o.e. the fluid t |
| FAA_A5 | A symptom of a low brake pedal is usually caused by air in the sy |
| FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
| Product line | New Brake Caliper |
| Fits | Acura · 3 vehicles |
Direct-fit component. Hassle-free installation with no modifications needed.
Zinc plated finish. Helps resist rust for longer-lasting reliability.
Floating caliper design. Delivers smooth, consistent braking performance.
Cross-references 43019S03Z02 and 43019S03Z03 for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Cardone New Brake Caliper for Acura Integra
Cardone Part Number 2C-3945 is a new rear left disc brake caliper for select Acura Integra models. It is built as a direct-fit replacement with a zinc-plated finish, cast iron caliper body, and steel piston for consistent braking performance and long-term corrosion resistance.
Fits 1998 Acura Integra, rear left. Fits 2000-2001 Acura Integra, rear left. This Cardone New Brake Caliper 2C-3945 is a practical replacement for drivers searching for a rear left Acura Integra brake caliper with included bracket and hardware kit.
Key Features
- Direct-fit disc brake caliper for rear left applications
- Cardone New Brake Caliper line for replacement brake hydraulics
- Zinc-plated finish with rust-resistant coating
- Cast iron caliper housing with steel piston
- Floating caliper design with 1.33 in. piston diameter
- Pad wear sensor included
- Bleeder screw, anti-rattle spring, caliper slides, and abutment clips included
- Mounting bracket and mounting hardware included
- Inlet fitting type: inverted flare; inlet port size: M10x1.0
Product Details
Cardone 2C-3945 is engineered as a new replacement caliper for Acura Integra brake service, not a remanufactured unit. The floating design helps the caliper move smoothly on its slides, while the zinc coating adds protection against corrosion in everyday driving conditions. The package includes the caliper, instruction sheet, bracket, and hardware kit for a complete service-ready assembly.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Part Can Address
- Rear left brake drag caused by a sticking caliper
- Uneven braking or pull during stops from a worn caliper assembly
- Brake pedal feel problems related to caliper wear or leakage
- Noise from worn caliper hardware, anti-rattle components, or slides
- Corrosion-related caliper service on Acura Integra rear brake systems
Installation Notes
Verify rear left position, inlet thread size, and brake line connection before installation. Use the correct brake fluid specified by the vehicle manufacturer, and bleed the system thoroughly after replacement. Floating caliper mounting pins should be lubricated with silicone grease, and all brake components should be inspected for wear before reassembly.
Quality Assurance
Cardone manufactures this new caliper using controlled quality processes to support smooth, consistent braking performance. The direct-fit design is intended to simplify installation on the listed Acura Integra applications, while the zinc-plated finish and included service components support dependable brake repair.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Acura | Integra | Rear Left | New Brake Caliper |
| 2000 | Acura | Integra | Rear Left | New Brake Caliper |
| 1998 | Acura | Integra | Rear Left | New Brake Caliper |
| No rows match your filter. | ||||