/live/media/A1/A1_659873_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 65-9873 Drive Shaft - Front
| Brand | Cardone 65-9873 |
|---|---|
| Position | Front |
| Drive Shaft Material | Steel |
| E-Waste | No |
| Greasable | Yes |
| Length (in) | 29" |
| Length (mm) | 736 |
| Measurement Method | Measurement is taken from end of the flange to the center of u-jo |
| Product Condition | New |
| Tubing Outer Diameter (in) | 2.5 |
| Tubing Outer Diameter (mm) | 63.5 |
| Product line | Driveshaft / Prop Shaft |
| Fits | Dodge · 22 vehicles |
OE match. Built to match O.E. form, fit and function.
Dynamically balanced. Helps deliver vibration-free operation and longer joint life.
Steel construction. Durable driveline tubing with lubricated slip yokes to reduce wear.
Cross-references Dodge 52105871AA for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Drive Shaft for Ram Trucks
The Cardone 65-9873 drive shaft is built for front driveline service on select Dodge Ram applications. It is engineered to match OE form, fit, and function, with steel tubing and dynamic balancing for smooth operation at speed.
For 1994-1999 Dodge Ram 2500 and Ram 3500 front driveline repairs, this Cardone Driveshaft / Prop Shaft line focuses on measured fitment, balanced performance, and durable construction. The 65-9873 is a direct replacement-style front drive shaft for vehicles that require a 29-inch unit in the specified configurations.
Key Features
- Steel drive shaft construction for strength and durability
- Built to match OE form, fit, and function
- 100% dynamically balanced at 3200 RPM for smoother, vibration-free operation
- Lubricated slip yokes help reduce premature wear
- Greasable design supports serviceable maintenance
- 29 in. length, measured from flange end to center of the opposite U-joint
- 2.5 in. tubing outer diameter
Detailed Product Overview
Cardone applies extensive testing and engineering experience to its prop shafts, using material and process analysis to produce a replacement drive shaft that aligns with OE performance targets. The 65-9873 is a new front drive shaft for Dodge Ram trucks, with fitment tied to axle and transfer case configuration. This part number is used on 1994-1998 Dodge Ram 2500 and Ram 3500 front applications, as well as select 1999 Dodge Ram 1500, Ram 2500, and Ram 3500 front applications. If you are searching for a front drive shaft for a 1999 Dodge Ram 2500 with Dana 44 or Dana 60 axle setup, or a 1994-1998 Dodge Ram 3500 front driveshaft replacement, this part number should be reviewed against the exact vehicle configuration.
What It Helps Resolve
- Driveline vibration at highway speeds
- Worn or noisy front driveshaft operation
- Excess play from aging slip yokes or U-joint interfaces
- Fitment issues from a damaged or incorrect-length replacement shaft
- Loss of smooth power transfer in front-wheel-drive engagement systems
Installation Notes and Fitment Tips
Compatible With 1999 Dodge Ram 1500, front, with Dana Model 44 axle and NV231HD transfer case; 1999 Dodge Ram 2500, front, with Dana Model 44 axle and NV241HD transfer case; 1999 Dodge Ram 2500, front, with Dana Model 60 axle and NV241HD transfer case; 1999 Dodge Ram 3500, front, with Dana Model 60 axle and NV241HD transfer case; 1994-1998 Dodge Ram 2500, front; and 1994-1998 Dodge Ram 3500, front. Verify the measured length, flange-to-opposite U-joint center, before installation. Confirm axle, transfer case, and front driveline configuration to match the listed application exactly. This part cross-references Dodge 52105871AA for the same application.
Quality Assurance
Cardone builds this driveshaft as a new replacement unit and dynamically balances it at 3200 RPM to support smooth operation and longer joint life. The brand’s prop shaft engineering process is focused on OE-style performance and consistent driveline quality.
| Year | Make | Model | Body Type | Transmission | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 1999 | Dodge | Ram 1500 | — | Manual | 5.2L | V8 | — | Front | Supplied as new; with Dana Model 44 Axle; with NV231HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 2500 | Standard Cab Pickup | Manual | 5.9L | V8 | GAS | Front | Supplied as new; with Dana Model 44 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 2500 | — | Manual | 8.0L | V10 | — | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 27-9/16" (700 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 2500 | — | Manual | 5.9L | L6 | DIESEL | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 2500 | Standard Cab Pickup | Manual | 5.9L | V8 | GAS | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 2500 | Standard Cab Pickup | Automatic | 5.9L | V8 | GAS | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 2500 | Standard Cab Pickup | Automatic | 5.9L | V8 | GAS | Front | Supplied as new; with Dana Model 44 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 3500 | Extended Cab Pickup | Manual | 5.9L | L6 | DIESEL | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 3500 | Extended Cab Pickup | Manual | 5.9L | V8 | GAS | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 3500 | Extended Cab Pickup | Automatic | 5.9L | V8 | GAS | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 3500 | Extended Cab Pickup | Automatic | 5.9L | L6 | DIESEL | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1999 | Dodge | Ram 3500 | Extended Cab Pickup | Manual | 8.0L | V10 | GAS | Front | Supplied as new; with Dana Model 60 Axle; with NV241HD Transfer Case; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1998 | Dodge | Ram 2500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1998 | Dodge | Ram 3500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1997 | Dodge | Ram 2500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1997 | Dodge | Ram 3500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1996 | Dodge | Ram 2500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1996 | Dodge | Ram 3500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1995 | Dodge | Ram 2500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1995 | Dodge | Ram 3500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1994 | Dodge | Ram 2500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| 1994 | Dodge | Ram 3500 | — | Manual | — | — | — | Front | Supplied as new; with 29" (736 mm) Long Driveshaft; Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side; Driveshaft / Prop Shaft |
| No rows match your filter. | |||||||||