/live/media/A1/A1_9670267_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Cardone 96-70267 Power Steering Pump
| Brand | Cardone 96-70267 |
|---|---|
| E-Waste | No |
| Hose Port Type | O-ring |
| Housing Material | Cast iron |
| Mounting Hardware Included | No |
| Package Contents | Hydraulic pump; instruction sheet; sealing kit |
| Power Steering Outlet Thread Size | 16x1.5 |
| Power Steering Pump Inlet Attachement Type | Hose barb |
| Power Steering Pump Outlet Attachment Type | Threaded |
| Power Steering Pump Outlet Quantity | 1 |
| Power Steering Reservoir Cap Included | Yes |
| Product Condition | New |
| Pulley Attachement Type | Press-on |
| Pulley Included | No |
| Remote Reservoir | No |
| Reservoir Included | Yes |
| Product line | Power Steering Pump |
| Fits | Chrysler and Dodge · 9 vehicles |
New pump design. Fits and performs like the original for a direct replacement.
Premium seals. High-temperature seals add durability under demanding conditions.
Cast iron housing. Provides a sturdy foundation for reliable steering performance.
Cross-references Chrysler 52113239AE, Dodge 52113239AA and Dodge 52113239AC for the same application. See all 4.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Power Steering Pump for Chrysler Aspen and Dodge Durango
This Cardone New power steering pump is built for direct replacement on select Chrysler and Dodge applications, including the 2007 Chrysler Aspen and 2004-2007 Dodge Durango. Part number 96-70267 is engineered to match original fit and performance while using premium high-temperature seals for dependable operation.
Key Features
- Cardone New Power Steering Pump, part number 96-70267
- Meets or exceeds O.E. performance requirements
- Premium high-temperature seals for added durability
- Precise bushing alignment helps reduce shaft and seal wear
- Computer load tested for real-world performance and durability
- Cast iron housing with reservoir included
- O-ring hose port, threaded outlet, and hose barb inlet
Product Details
Cardone’s Power Steering Pump line is built from decades of remanufacturing and engineering experience, with this new unit designed to fit and perform like the original equipment pump. The 96-70267 uses a cast iron housing, a press-on pulley attachment, and a reservoir-included design for the specified Chrysler Aspen and Dodge Durango applications. This part cross-references Chrysler 52113239AE and Dodge 52113239AA for the same application.
Compatible With 2007 Chrysler Aspen, N/A, and 2004-2007 Dodge Durango, N/A. Use this pump when replacing a worn or noisy hydraulic steering pump on these vehicles, including applications that require the OE fluid and a flushed system for proper service.
Common Issues This Pump Can Address
- Hard steering at low engine speed
- Whining or pump noise during operation
- Loss of power steering assist
- Steering effort that changes after pump wear or contamination
- Seal leakage at the pump housing or shaft area
Installation Notes and Tips
- Fits 2007 Chrysler Aspen, N/A.
- Fits 2004-2007 Dodge Durango, N/A.
- Flush the steering system before installation and use OE-specified fluid.
- An optional in-line filter must be installed for warranty on the listed applications.
- Install the supplied sealing kit during service and inspect the steering system for contamination or binding components.
- The pulley is not included; transfer or replace the pulley as required for the application.
Quality Assurance
Each pump is computer load tested to verify performance under simulated operating conditions. Premium seals and controlled bushing alignment are used to support durability, noise control, and consistent steering response in Chrysler Aspen and Dodge Durango service applications.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2007 | Chrysler | Aspen | 4.7L | V8 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2007 | Dodge | Durango | 4.7L | V8 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2007 | Dodge | Durango | 3.7L | V6 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2006 | Dodge | Durango | 4.7L | V8 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2006 | Dodge | Durango | 3.7L | V6 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2005 | Dodge | Durango | 4.7L | V8 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2005 | Dodge | Durango | 3.7L | V6 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2004 | Dodge | Durango | 4.7L | V8 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| 2004 | Dodge | Durango | 3.7L | V6 | N/A | Reservoir included, optional in-line filter must be installed for warranty, system must be flushed with seal kit and OE fluid used.; Power Steering Pump |
| No rows match your filter. | ||||||