/live/media/A1/A1_972619_Fro.jpg)
Cardone 97-2619 Rack and Pinion Assembly
| Brand | Cardone 97-2619 |
|---|---|
| Casting Material | Aluminum |
| Distance Between Mounting Holes (in) | 19.13 |
| Distance Between Mounting Holes (mm) | 486.00 |
| E-Waste | No |
| Hose Port Type | O-Ring/O-Ring |
| Input Shaft Diameter (in) | 0.69 |
| Input Shaft Diameter (mm) | 17.50 |
| Input Shaft Length (in) | 49.50 |
| Input Shaft Length (mm) | 1257.30 |
| Number of Mounting Holes | 2 |
| Package Contents | Rack and Pinion, Kit, Instruction Sheet |
| Pressure Port Thread Size | M16 x 1.5 |
| Product Condition | New |
| Rack Length (in) | 46.77 |
| Rack Length (mm) | 1188.00 |
| Return Port Thread Size | M17 x 1.5 |
| Steering Rack Color | Black |
| Thread Length (in) | 2.05 |
| Thread Length (mm) | 52.00 |
| Tie Rod Ends Included | Yes |
| Total Turns Lock to Lock | 3.32 |
| Product line | Rack and Pinion Assembly |
| Fits | Toyota · 7 vehicles |
OE-level performance. Built to meet or exceed OEM standards for dependable steering response.
Precision-balanced spool valve. Delivers exceptional steering feel and consistent control.
Corrosion-resistant coating. Helps keep tie rods and lines clean while resisting rust.
Cross-references Toyota 4425008030 and Toyota 4425008040 for the same application. See all 2.
Cardone Rack and Pinion for Toyota Sienna
Restore precise steering response with this new Cardone rack and pinion assembly for the Toyota Sienna. Cardone Engineered Technology uses reverse-engineering expertise to address original design weaknesses and deliver a rack built to meet or exceed OEM performance.
Fits 2004-2010 Toyota Sienna, N/A.
Key Features
- New rack and pinion assembly built to meet or exceed O.E.M. performance
- Computerized spool valve balancing for consistent steering feel
- Performance tested for fit, function, and reliable operation
- Supplied with OEM-grade seals, O-rings, and boots for sealing performance and service life
- Environmentally friendly coating on tie rods and lines helps resist rust and maintain a clean appearance
- Aluminum casting with black steering rack finish
- Includes inner tie rods and a kit with instruction sheet
- Pressure port thread size: M16 x 1.5; return port thread size: M17 x 1.5
Product Details
Cardone 97-2619 is a brand-new rack and pinion assembly engineered for hydraulic power steering applications on the Toyota Sienna. It uses an O-ring/O-ring hose port design, has a 46.77-inch rack length, 19.13-inch mounting hole spacing, and a 3.32 lock-to-lock turn ratio. The unit is built from aluminum and tested to meet strict SAE specifications for dependable steering performance. This part cross-references Toyota 4425008030 and 4425008040 for the same application.
Common Steering Issues It May Address
- Excessive steering play or loose on-center feel
- Uneven or inconsistent steering response
- Fluid leakage from worn rack seals or boots
- Noise or roughness during steering input
- Wear-related steering performance loss in a hydraulic rack system
Installation Notes
For 2004-2010 Toyota Sienna rack and pinion replacement, follow the included instruction sheet and verify all port sizes, mounting points, and steering connections before installation. Cardone recommends using the suggested OE fluid, flushing the system, and installing an in-line filter for warranty purposes where applicable. Confirm the hydraulic power steering setup and inspect related components before returning the vehicle to service.
Quality Assurance
Cardone 97-2619 is produced under Cardone Engineered Technology and tested to strict SAE specifications. The design process focuses on correcting known OE weaknesses, and each unit is evaluated for reliable, long-lasting performance in the Toyota Sienna application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| 2009 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| 2008 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| 2007 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| 2006 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| 2005 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| 2004 | Toyota | Sienna | N/A | Includes Inner Tie Rods; In-Line Filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; with Seal Kit; with Hydraulic Power; Rack and Pinion Assembly |
| No rows match your filter. | ||||