Centric 121.02007 Disc Brake Rotor - Rear

Reliable Centric C-TEK Standard Disc Brake Rotor Overview

The Centric C-TEK Standard Disc Brake Rotor 121.02007 offers a solid, smooth-surfaced braking solution designed for specific vehicle applications. Engineered to meet OEM specifications, this rotor provides consistent performance and durability for vehicles requiring a 5-lug, 9.902-inch outside diameter rotor.

• Part Number: 121.02007
• Brand Line: C-TEK Standard Disc Brake Rotors
• Outside Diameter: 9.902 inches (251.5 mm)
• Nominal Thickness: 0.394 inches (10.0 mm)
• Discard Thickness: 0.354 inches (9.0 mm)
• Overall Height: 1.988 inches (50.5 mm)
• Solid, smooth surface rotor design
• 5 stud/lug holes with 0.512 inch (13 mm) diameter
• Center Hole Diameter: 2.323 inches (59 mm)
• Mounting Bolt Hole Circle Diameter: 3.858 inches (98 mm)
• Weight: 8.19 lbs (3.72 kgs)
• ABS Tone Ring: Not included

About the C-TEK Standard Disc Brake Rotors Line

The C-TEK Standard Disc Brake Rotors line by Centric is designed to provide dependable, direct replacement rotors that meet or exceed OEM standards. These rotors feature a solid construction with a smooth surface finish, ensuring consistent braking performance and compatibility with a wide range of vehicles. The 121.02007 rotor is part of this line, offering a balance of durability and precision fitment for vehicles requiring a solid rotor without ABS tone rings.

Technical Details and Specifications

This Centric rotor features a solid disc design with a smooth surface type, optimized for vehicles that do not require vented rotors or ABS tone rings. The rotor measures 9.902 inches in outside diameter and has a nominal thickness of 0.394 inches, with a discard thickness of 0.354 inches, indicating when replacement is necessary. The overall height is 1.988 inches, and it mounts using a 5-lug pattern with a 3.858-inch bolt circle diameter. The center hole diameter is 2.323 inches, ensuring proper hub fitment. Weighing approximately 8.19 pounds, this rotor balances strength and manageable weight for effective braking performance.

Common Applications and Problem Solving

• Replacement for worn or warped rotors causing brake pulsation or noise
• Restores proper rotor thickness to maintain safe braking distances
• Addresses rotor surface damage such as scoring or uneven wear
• Suitable for vehicles requiring solid rotors without ABS tone rings
• Compatible with vehicles using a 5-lug, 9.902-inch diameter rotor configuration

Installation Notes and Tips

Ensure the rotor surface is clean and free of rust or debris before installation. Verify the rotor thickness is within nominal specifications and replace if below discard thickness. Use proper torque specifications on lug nuts to avoid rotor warping. This rotor does not include bearings or ABS tone rings, so confirm compatibility with your vehicle’s braking system. It is recommended to replace brake pads simultaneously for optimal braking performance.

Quality Assurance and Warranty

Centric C-TEK Standard Disc Brake Rotors are manufactured to meet or exceed OEM standards, ensuring reliable performance and fitment. While specific warranty details for part number 121.02007 are not provided here, Centric typically offers limited warranties covering defects in materials and workmanship. Consult product documentation or Centric directly for warranty terms applicable to this rotor.