Centric 121.35180 Disc Brake Rotor - Front

Centric C-TEK Front Brake Rotor for Mercedes-Benz Metris

Centric C-TEK Standard Disc Brake Rotor 121.35180 is an OE-style replacement rotor for front brake service on the Mercedes-Benz Metris. It is built as a vented, smooth-surface rotor with the dimensions needed for the listed applications, including 330 mm front disc fitment on 2016-2020 models.

Key Features

• Part number 121.35180 from Centric C-TEK Standard Disc Brake Rotors
• Front disc brake rotor for Mercedes-Benz Metris applications
• Vented rotor design for front axle brake cooling
• Smooth surface type for standard brake service
• Outside diameter: 12.980 in. / 329.900 mm
• Nominal thickness: 1.250 in. / 32.000 mm
• Discard thickness: 1.102 in. / 28.000 mm
• 5-lug pattern with 112 mm bolt circle diameter
• Center hole diameter: 2.630 in. / 67.000 mm
• Floating disc mounting with pillar vane style

About the C-TEK Line

The Centric C-TEK line is positioned as an affordable OE replacement for routine brake repair. These rotors and drums are protected on the shelf with rust preventative oil, helping preserve the part before installation. If you are replacing worn front rotors on a Mercedes-Benz Metris, Centric 121.35180 provides a straightforward standard replacement option.

Detailed Description

This rotor is engineered for front fitment on 2021-2022 Mercedes-Benz Metris and 2016-2020 Mercedes-Benz Metris models. The vented construction supports front brake heat management, while the smooth face is appropriate for standard pad replacement and everyday braking service. Additional dimensions include an overall height of 2.300 in. / 58.600 mm, hat ID of 6.028 in. / 153.100 mm, and one miscellaneous hole as listed in the product data. Centric 121.35180 is a practical choice when you need a direct replacement rotor for Mercedes-Benz Metris front brake maintenance.

This part cross-references Four Seasons 45974 for the same application.

What It Helps Address

• Front brake rotor wear from normal mileage
• Brake pulsation caused by rotor thickness variation
• Reduced braking performance from scored or rusted rotors
• Noise related to worn front brake discs
• Service needs on Mercedes-Benz Metris front brake repairs

Installation Notes and Tips

Verify rotor diameter, center bore, and bolt pattern before installation. Clean the rust preventative oil from the braking surface before use, and inspect pads, calipers, and hub condition during service. For best results, replace rotors in axle pairs and follow the vehicle manufacturer’s brake bedding procedure after installation.

Quality Assurance

Centric’s C-TEK rotors are supplied as OE replacement parts and are protected with rust preventative oil during storage. Part number 121.35180 is built to match the listed Mercedes-Benz Metris front applications and dimensional requirements.