/live/media/CE/CE_12144049_Fro.jpg)
Centric 121.44049 Disc Brake Rotor - Front
| Brand | Centric 121.44049 |
|---|---|
| Position | Front |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Bolt Thread Pitch | 1.250 |
| Center Hole Diameter | 3.307 |
| Center Hole Diameter | 84.000 |
| Disc Mounting [cntrc] | Behind the Hub |
| Discard Thickness | 0.945 |
| Discard Thickness | 24.000 |
| Misc Holes [cntrc] | 0 |
| Mounting Bolt Hole Circle Diameter | 4.331 |
| Mounting Bolt Hole Circle Diameter | 110.000 |
| Mounting Bolt Hole Diameter | 10.000 |
| Mounting Bolt Hole Quantity | 6 |
| Nominal Thickness | 0.984 |
| Nominal Thickness | 25.000 |
| Outside Diameter | 10.098 |
| Outside Diameter | 256.500 |
| Overall Height | 1.835 |
| Overall Height | 46.600 |
| Solid Or Vented Type Rotor | Vented |
| Surface Type | Smooth |
| Vane Style [cntrc] | Straight |
| Weight [cntrc] kgs | 5.730 |
| Weight [cntrc] lbs | 12.600 |
| Product line | C-TEK Standard Disc Brake Rotors |
| Fits | Toyota · 2 vehicles |
Vented design. Helps move air through the rotor for more consistent braking performance.
Smooth surface. Provides a clean contact area for dependable pad engagement.
Standard disc rotor. A practical replacement for everyday service and value.
Cross-references Centric Parts 121.44049, Dayco 86118 and Four Seasons 96118 for the same application. See all 28.
Centric C-TEK Rotor for Toyota Pickup
The Centric C-TEK Standard Disc Brake Rotor, part number 121.44049, is built for front brake service on select Toyota Pickup applications. It combines a smooth surface, vented construction, and OE-style dimensions to support consistent braking performance and dependable service life.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line for everyday brake service
- Part number 121.44049
- Vented rotor design with straight vanes for heat management
- Smooth surface type for a clean braking contact area
- Outside diameter: 10.098 in. / 256.500 mm
- Nominal thickness: 0.984 in. / 25.000 mm
- Discard thickness: 0.945 in. / 24.000 mm
- Overall height: 1.835 in. / 46.600 mm
- 6-bolt mounting pattern with 110.000 mm bolt circle diameter
- Center hole diameter: 3.307 in. / 84.000 mm
- Behind-the-hub disc mounting
- ABS tone ring not included
- Bearings not included
Product Details
Centric’s C-TEK Standard Disc Brake Rotors line is positioned for service replacement where correct fit, stable braking feel, and practical value matter. This rotor is specified for 1987-1988 Toyota Pickup front applications, including 1 Ton and DRW configurations. The vented, straight-vane design helps move heat away from the braking surface, while the smooth finish supports even pad contact during brake service. Part number 121.44049 is also referenced in aftermarket catalogs under cross-reference numbers such as Dayco 86118 and Gates 31069 for the same application.
What It Helps Address
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from heat buildup
- Rotor replacement needs during front brake service
- Surface wear that affects pad contact and stopping feel
- Fitment requirements for 1987-1988 Toyota Pickup front brake repair
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center bore, and hub mounting style before installation. Clean the hub face thoroughly to help prevent runout-related brake noise or pedal pulsation. Inspect pads, calipers, and wheel bearings during service, and confirm the rotor meets the vehicle’s front brake specification for 1987-1988 Toyota Pickup models.
Quality Assurance
Centric C-TEK Standard Disc Brake Rotors are engineered for service life and value across a wide range of brake applications. This rotor is manufactured to support dependable replacement performance for Toyota Pickup front brake service, with dimensions and construction details listed for accurate selection.
| Year | Make | Model | Body Type | Drive Type | Position | Notes |
|---|---|---|---|---|---|---|
| 1988 | Toyota | Pickup | Cab & Chassis | RWD | Front | 1 Ton; DRW; C-TEK Standard Disc Brake Rotors |
| 1987 | Toyota | Pickup | Cab & Chassis | RWD | Front | 1 Ton; DRW; C-TEK Standard Disc Brake Rotors |
| No rows match your filter. | ||||||