/live/media/CE/CE_12151029_Fro.jpg)
OE Quality
60-Day Returns
Centric 121.51029 Disc Brake Rotor - Rear
Centric C-TEK Rear Brake Rotor for Tiburon
Centric C-TEK Standard Disc Brake Rotor 121.51029 is a rear solid rotor built for 2007-2008 Hyundai Tiburon applications with a 282 mm outside diameter. It is a smooth-surface rotor intended for direct brake service on the rear axle, with fitment matched to the listed vehicle years and position.
Key Features
- Centric C-TEK Standard Disc Brake Rotors line
- Part number 121.51029
- Rear disc brake rotor for 2007-2008 Hyundai Tiburon
- Solid rotor design with smooth surface type
- Outside diameter: 11.102 in. / 282.000 mm
- Nominal thickness: 0.394 in. / 10.000 mm
- Discard thickness: 0.315 in. / 8.000 mm
- 5-lug pattern with 4.500 in. bolt circle diameter
- Center hole diameter: 2.992 in. / 76.000 mm
- Floating disc mounting configuration
Product Details
The Centric C-TEK Standard Disc Brake Rotors line focuses on serviceable brake components that balance performance, durability, and value across a wide range of everyday driving applications. This rotor uses a solid construction and smooth friction surface, making it a straightforward replacement for rear brake service on the Hyundai Tiburon. Part number 121.51029 is also referenced by interchange numbers including 44601, 44601G, 584112C700, 850346, 980959, BD180052, PRT5779, and Raybestos Brakes 980959R for the same application.
What This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Brake noise related to rotor wear or surface irregularity
- Reduced braking consistency from a rotor below discard thickness
- Service replacement needs for 2007-2008 Hyundai Tiburon rear brakes
- Fitment-specific rotor replacement for a 282 mm rear disc setup
Installation Notes and Tips
Verify rotor diameter, center hole diameter, bolt circle, and rear position before installation. Clean the hub mounting surface thoroughly to help the rotor seat evenly, and inspect pads, caliper hardware, and wheel bearings during brake service. Because this rotor is listed as a solid rear disc brake rotor with floating disc mounting, confirm the vehicle matches the specified 2007-2008 Hyundai Tiburon rear application before ordering.
Quality Assurance
Centric positions the C-TEK Standard Disc Brake Rotors line as a practical replacement option for consistent service life and dependable everyday braking value. This part number 121.51029 is built to the published dimensional specifications for the listed Hyundai Tiburon fitment.
| Brand | Centric |
|---|---|
| Part Number | 121.51029 |
| Position | C-TEK Standard Disc Brake Rotors, Rear |
| Discard Thickness | 0.315 |
| Discard Thickness | 8.000 |
| Nominal Thickness | 0.394 |
| Nominal Thickness | 10.000 |
| Overall Height | 1.791 |
| Overall Height | 45.500 |
| Outside Diameter | 11.102 |
| Outside Diameter | 282.000 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Solid |
| Bearings Included | No |
| Center Hole Diameter | 2.992 |
| Center Hole Diameter | 76.000 |
| Mounting Bolt Hole Circle Diameter | 114.300 |
| Mounting Bolt Hole Circle Diameter | 4.500 |
| Stud/Lug Hole Quantity | 5 |
| Stud/Lug Hole Diameter | 0.492 |
| Stud/Lug Hole Diameter | 12.500 |
| Disc Mounting [cntrc] | Floating |
| Misc Holes [cntrc] | 5 |
| Weight [cntrc] kgs | 5.250 |
| Weight [cntrc] lbs | 11.550 |
This part fits 2 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2008 | Hyundai | Tiburon | 2.7L | V6 | Rear | 282mm dia; C-TEK Standard Disc Brake Rotors |
| 2007 | Hyundai | Tiburon | 2.7L | V6 | Rear | 282mm dia; C-TEK Standard Disc Brake Rotors |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.