Centric 121.61057 Disc Brake Rotor - Front

Overview of Centric C-TEK Standard Disc Brake Rotor 121.61057

The Centric C-TEK Standard Disc Brake Rotor 121.61057 is engineered for reliable braking performance on Ford Windstar vehicles. Designed as a vented rotor with a smooth surface, it offers consistent heat dissipation and durability for everyday driving conditions.

• Compatible with Ford Windstar models
• Vented disc brake rotor design for improved cooling
• Overall diameter of 11.102 inches (282 mm)
• Nominal thickness of 1.024 inches (26 mm) with discard thickness at 0.974 inches (24.75 mm)
• Floating disc mounting style with straight vane design
• 5 stud/lug holes with 0.551 inch (14 mm) diameter
• Center hole diameter of 2.799 inches (71.1 mm)
• Weight approximately 16.5 lbs (7.5 kgs)
• ABS tone ring not included

Product Line Details: C-TEK Standard Disc Brake Rotors

The C-TEK Standard Disc Brake Rotors line by Centric focuses on providing OEM-quality replacement rotors that meet or exceed factory specifications. This product line emphasizes precise fitment and consistent braking performance, making it suitable for routine maintenance and repair on vehicles like the Ford Windstar. The 121.61057 rotor maintains the original equipment’s vented design and smooth surface finish to ensure proper pad contact and heat management.

Technical Specifications and Features

This disc brake rotor features a vented design with straight vanes that facilitate effective heat dissipation during braking, reducing the risk of brake fade. The rotor’s nominal thickness is 1.024 inches (26 mm), with a discard thickness of 0.974 inches (24.75 mm), indicating when replacement is necessary to maintain safe braking performance. The overall height measures 1.823 inches (46.3 mm), and the outside diameter is 11.102 inches (282 mm), matching the original equipment dimensions for the Ford Windstar. The rotor mounts using a floating disc mounting style and includes five lug holes sized at 0.551 inches (14 mm) diameter, arranged on a 4.252 inch (108 mm) bolt circle diameter. This rotor does not include bearings or an ABS tone ring.

Common Applications and Problem Solving

• Replacement for worn or warped rotors causing brake pulsation
• Addressing rotor thickness below discard limits to restore braking efficiency
• Resolving excessive brake noise due to uneven rotor surfaces
• Improving heat dissipation to prevent brake fade during extended use
• Ensuring proper fitment and alignment on Ford Windstar brake assemblies

Installation Notes and Tips

When installing the Centric C-TEK Standard Disc Brake Rotor 121.61057, ensure the rotor surface is clean and free of any contaminants before mounting. Verify that the rotor thickness meets or exceeds the nominal thickness and is above the discard thickness limit. Use proper torque specifications for the lug nuts and mounting bolts to avoid rotor warping. Since this rotor does not include bearings or an ABS tone ring, reuse existing components or replace separately if necessary. It is recommended to inspect brake pads and hardware during installation for optimal braking system performance.

Quality Assurance and Warranty

Centric’s C-TEK Standard Disc Brake Rotors are manufactured to meet or exceed OEM standards, ensuring consistent quality and durability. While specific warranty details for part number 121.61057 are not provided here, Centric typically offers limited warranties covering defects in materials and workmanship. For detailed warranty information, refer to Centric’s official documentation or contact authorized distributors.