/live/media/CE/CE_13042501_Fro.jpg)
Centric 130.42501 Brake Master Cylinder
| Brand | Centric 130.42501 |
|---|---|
| Reservoir Material | Plastic |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 2 |
| Master Cylinder Bore Diameter | 0.875 |
| Master Cylinder Bore Diameter | 22.225 |
| Brake Booster Included | No |
| Master Cylinder Cap Included | Yes |
| Master Cylinder Material | Aluminum |
| Push Rod Included | No |
| Reservoir Included | Yes |
| Reservoir Type | Single |
| Primary Outlet Thread Diameter | 10.000 |
| Secondary Outlet Thread Diameter | 10.000 |
| Bleeder Hoses Included | No |
| Port Quantity | 2 |
| Port Quantity | 3 |
| Mounting Bracket Included | No |
| Secondary Outlet Thread Pitch | 1.00 |
| Primary Outlet Thread Pitch | 1.00 |
| Bore Type | Straight |
| Bore Size | 0.875 |
| Bore Size | 22.225 |
| Secondary Outlet Thread Size | M10-1.00 |
| Primary Outlet Thread Size | M10-1.00 |
| Primary Outlet Flare Type | Inverted |
| Secondary Outlet Flare Type | Inverted |
| Primary Bore Diameter | 0.875 |
| Primary Bore Diameter | 22.225 |
| Reservoir Style | Removable |
| Boss, Nipple or Port: Center, Right: [cntrc] | Screw |
| Product line | Centric Premium Brake Master Cylinders |
| Fits | Nissan · 2 vehicles |
OE-style replacement. Matches original equipment quality, configuration, and fitment.
Aluminum casting body. Original design where applicable for a factory-correct look and feel.
Complete assembly. Includes reservoir, cap, switches, and floats for a ready-to-install unit.
Cross-references Gates 39407, Raybestos Brakes MC39407 and Unity Automotive 11936 for the same application. See all 16.
Centric Premium Brake Master Cylinder
The Centric Premium Brake Master Cylinder, part number 130.42501, is an OE-style hydraulic replacement for the brake system on compatible Nissan applications. It is built with an aluminum master cylinder body, a removable plastic reservoir, and a single-reservoir layout with a cap included for a direct-fit service replacement.
Fits 1982-1983 Nissan 200SX, N/A. This application-specific master cylinder is built to match original equipment quality, configuration, and fitment for the 1982-1983 Nissan 200SX brake hydraulic system.
Key Features
- Centric Premium Brake Master Cylinders line for brake hydraulic service
- Part number 130.42501
- Aluminum master cylinder body with straight bore design
- 0.875 in. / 22.225 mm bore diameter
- Single removable plastic reservoir with cap included
- Two mounting holes and two brake outlet ports
- M10-1.00 inverted flare outlet threads on primary and secondary ports
- OE-style configuration and fitment for direct replacement use
Product Details
Centric’s brake hydraulic program covers master cylinders, wheel cylinders, hoses, repair kits, and remanufactured boosters. This master cylinder follows original equipment dimensions and port configuration, helping maintain proper brake hydraulic routing on the 1982-1983 Nissan 200SX. The aluminum casting body and removable reservoir support a service-ready design, while the 7/8-inch bore size matches the specified hydraulic setup for this application. This part cross-references Raybestos Brakes MC39407 for the same application.
Common Brake System Issues
- Brake pedal sinking or inconsistent pedal feel
- External fluid leakage from the master cylinder body or outlets
- Loss of hydraulic pressure in the brake circuit
- Reservoir or cap wear affecting fluid retention
- Brake warning concerns tied to master cylinder failure
Installation Notes
Verify bore size, outlet thread size, and reservoir style before installation. This master cylinder does not include mounting hardware, a brake booster, push rod, or bleeder hoses. Bench bleeding is recommended before final installation, and the brake system should be inspected for fluid condition, line integrity, and proper pedal travel after replacement. Confirm fitment for the 1982-1983 Nissan 200SX, N/A, against the vehicle’s original hydraulic layout.
Quality Assurance
Centric Premium Brake Master Cylinders are engineered to match original equipment parts in quality, configuration, and fitment. The Centric Parts brake hydraulic program is built around OE-style replacement components for brake service applications.
| Year | Make | Model | Notes |
|---|---|---|---|
| 1983 | Nissan | 200SX | Centric Premium Brake Master Cylinders |
| 1982 | Nissan | 200SX | Centric Premium Brake Master Cylinders |
| No rows match your filter. | |||