Centric 130.61167 Brake Master Cylinder

Centric Brake Master Cylinder for Ford EcoSport

Restore consistent hydraulic brake pressure with this Centric Premium Brake Master Cylinder, part number 130.61167. Built with an aluminum master cylinder body and a 0.875 in. (22.225 mm) straight bore, it is a direct-fit brake hydraulics replacement for select Ford EcoSport applications.

The Centric Premium Brake Master Cylinders line focuses on OE-style brake hydraulic replacement parts with application-specific fitment and the core dimensions needed for proper pedal response. This 130.61167 master cylinder uses M12-1.50 inverted outlet threads at both ports and a removable reservoir style.

Key Features

• Part number 130.61167
• Aluminum master cylinder construction
• 0.875 in. / 22.225 mm straight bore
• Two-port design with M12-1.50 inverted outlet threads
• Reservoir style: removable
• Reservoir material: plastic
• Mounting hole quantity: 2
• Brake booster, cap, push rod, reservoir, bleeder hoses, and mounting hardware are not included

Detailed Description

Centric 130.61167 is a brake master cylinder engineered for Ford EcoSport fitments listed below. It features a straight bore design, aluminum housing, and dual M12-1.50 inverted flare outlets to match the hydraulic connection requirements of the application. The compact 0.875 in. bore size supports proper brake system pressure transfer when replacing a worn or leaking master cylinder.

Compatible With Ford EcoSport models from 2018 through 2022, including 2020-2021 EcoSport with 320mm front disc and manual parking brakes, 2020 EcoSport with 338mm front disc, 2018 EcoSport with 338mm front disc, 2019 EcoSport with 318mm front disc, and 2018-2019 EcoSport excluding Brembo-equipped vehicles. This part cross-references Ford GN1Z2140B for the same application. Centric Premium Brake Master Cylinders 130.61167 is a practical OE-style replacement for brake hydraulic service on the Ford EcoSport.

What It Helps Fix

• Low or inconsistent brake pedal pressure
• External brake fluid leakage at the master cylinder
• Internal bypass that causes pedal fade or sinking
• Brake warning concerns related to hydraulic loss
• Uneven brake response after master cylinder wear

Installation Notes

Verify bore size, outlet thread size, and reservoir configuration before installation. This unit uses two mounting holes and M12-1.50 inverted outlet ports, so the brake lines and vehicle configuration should be matched carefully to the original part. Bench bleeding is typically required before final installation to remove trapped air from the hydraulic circuit. Confirm all connections are clean and properly tightened, then bleed the brake system according to service procedures.

Quality Assurance

Centric Premium Brake Master Cylinders are built as application-specific brake hydraulic replacement parts for service work where correct fit and hydraulic dimensions matter. Part number 130.61167 is specified for select Ford EcoSport brake applications and follows the listed OE-style connection and bore specifications.