/live/media/CE/CE_15065176_Fro.jpg)
Centric 150.65176 Brake Hydraulic Hose - Front Left
| Brand | Centric 150.65176 |
|---|---|
| Position | Front Left |
| DOT Approved | Yes |
| Color | Black |
| Outer Sleeve Material | Epdm rubber |
| Mounting Hardware Included | No |
| Grommets Included | No |
| Bracket Included | Yes |
| Gasket Or Seal Included | Yes |
| Bracket Quantity | 1 |
| Shield Included | No |
| Bracket Material | Steel |
| End 1 Fitting Material | Metal |
| End 1 Fitting Type | Banjo |
| End 2 Fitting Material | Metal |
| End 2 Fitting Type | Female |
| Teflon Lined | No |
| End 2 Flare Type | Inverted |
| Overall Length | 22.717 |
| Overall Length | 577.00 |
| End 2 Thread Size | 3/8"-24 |
| End 1 Thread Size | 9.6mm |
| Banjo Bolt Part # [cntrc] | 117.99013 |
| Banjo Bolt [cntrc] | Yes |
| Clip [cntrc] | No |
| Notes #1 [cntrc] | 2 rubber sleeves |
| Washer Part # [cntrc] | 117.99000 |
| Fits | — |
DOT approved. Meets brake hydraulic standards for dependable performance.
EPDM rubber sleeve. Resists wear with a black outer jacket and metal fittings.
Bracket included. Comes with a steel bracket plus gasket or seal.
Cross-references Centric Parts 150.65176, Dorman - First Stop H620609 and Raybestos Brakes BH382688 for the same application. See all 10.
Centric Premium Brake Hydraulic Hose 150.65176
The Centric Premium Brake Hydraulic Hose 150.65176 is a DOT-approved brake hose built for dependable hydraulic transfer in the braking system. It uses an EPDM rubber outer sleeve, a steel mounting bracket, and metal end fittings to support secure routing and a consistent brake pedal feel.
Centric’s brake hydraulic hose line covers core brake hydraulic service parts, including hoses, master and wheel cylinders, and related repair components. This makes the 150.65176 part of a focused brake hydraulic program for service work on applications such as Ford F-250 and Ford F-350 brake hose replacement needs.
Key Features
- DOT approved brake hydraulic hose
- Black EPDM rubber outer sleeve
- Steel bracket included for mounting support
- Metal banjo end fitting on one side
- Metal female inverted flare fitting on the other side
- Gasket or seal included
- Overall length: 22.717 in. (577.00 mm)
- End 2 thread size: 3/8"-24
- End 1 thread size: 9.6 mm
Product Details
Built as a brake hydraulic hose, this Centric Premium Brake Hydraulic Hose 150.65176 is intended for direct brake fluid transfer between hard lines and moving suspension or caliper components. The hose construction uses EPDM rubber for the outer sleeve, while the metal fittings and included bracket help maintain a secure connection and proper routing in the brake system. This part cross-references Dorman - First Stop H620609 for the same application.
Common Brake Hose Replacement Issues
- Cracked or weathered brake hose rubber
- Brake fluid seepage at hose connections
- Soft or inconsistent brake pedal response from hose deterioration
- Corrosion or damage at the hose bracket area
- Restricted brake fluid flow caused by an aging hose
Installation Notes and Tips
Verify the banjo and inverted flare connection points before installation, and confirm thread sizes match the vehicle’s brake plumbing. The hose includes a bracket and gasket or seal, but mounting hardware is not listed as included. Use the correct banjo bolt and washer part references when required, and bleed the brake system after installation to remove air from the hydraulic circuit. Fits 2005-2007 Ford F-250, front; fits 2005-2007 Ford F-350, front.
Quality Assurance
Centric’s brake hydraulic program is organized to cover a wide range of brake service components with application-focused parts for hydraulic repair and replacement. The 150.65176 is DOT approved and built with materials selected for brake-system service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||