/live/media/CE/CE_15079004_Fro.jpg)
Centric 150.79004 Brake Hydraulic Hose - Front Left
| Brand | Centric 150.79004 |
|---|---|
| Position | Front Left |
| DOT Approved | Yes |
| Color | Black |
| Outer Sleeve Material | Epdm rubber |
| Mounting Hardware Included | No |
| Grommets Included | No |
| Bracket Included | No |
| Gasket Or Seal Included | Yes |
| Bracket Quantity | 0 |
| Shield Included | No |
| End 1 Fitting Material | Metal |
| End 1 Fitting Type | Banjo |
| End 2 Fitting Material | Metal |
| End 2 Fitting Type | Female |
| Teflon Lined | No |
| End 2 Flare Type | Inverted |
| Overall Length | 27.008 |
| Overall Length | 686.00 |
| End 2 Thread Size | 3/8"-24 |
| End 1 Thread Size | 9.6mm |
| End 3 Fitting Type | Female |
| End 3 Flare Type | Inverted |
| End 3 Thread Size | 3/8"-24 |
| Banjo Bolt Part # [cntrc] | 117.99013 |
| Banjo Bolt [cntrc] | Yes |
| Clip Qty [cntrc] | 1 |
| Clip [cntrc] | Yes |
| Notes #1 [cntrc] | 2 females on block |
| Washer Part # [cntrc] | 117.99011 |
| Fits | — |
DOT approved. Meets road-use standards for dependable hydraulic performance.
EPDM rubber sleeve. Helps resist wear while keeping the hose flexible.
Banjo and female fittings. Provides a secure, direct hydraulic connection.
Cross-references Centric Parts 150.79004, Dorman - First Stop H621043 and Raybestos Brakes BH380933 for the same application. See all 17.
Centric Brake Hydraulic Hose 150.79004
The Centric Premium Brake Hydraulic Hose 150.79004 is a DOT-approved brake hose built for hydraulic brake systems that need a direct replacement with the correct end fittings and length. It uses an EPDM rubber outer sleeve with metal fittings and a black finish for a clean OE-style appearance.
Centric’s brake hydraulic line covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters, giving technicians a broad source for brake hydraulic service parts. This hose is a practical choice for brake hose replacement on vehicles that call for a banjo-to-female inverted connection layout.
Key Features
- DOT approved brake hydraulic hose
- Black EPDM rubber outer sleeve
- Metal banjo end fitting and metal female inverted end fitting
- Overall length: 27.008 in. / 686.00 mm
- Gasket or seal included
- Banjo bolt reference: 117.99013
- Washer reference: 117.99011
- Centric Premium Brake Hydraulic Hoses line
Product Details
Part number 150.79004 is a brake hydraulic hose with a banjo fitting on one end and female inverted flare connections on the other ends, including 3/8"-24 thread sizes where specified. The hose is not Teflon lined and does not include mounting hardware, brackets, grommets, or a shield. Notes indicate a block with two female ports, which makes correct routing and port matching important during replacement. This part cross-references Dorman - First Stop H621043 for the same application.
Common Brake Hose Issues It Can Address
- Cracked or weathered brake hose rubber
- Brake fluid seepage at hose fittings or seals
- Soft or inconsistent brake pedal feel caused by hose deterioration
- Restricted hydraulic flow from an aging hose assembly
- Corrosion or wear at the hose connection points
Installation Notes and Tips
- Verify banjo and female inverted flare connections before installation.
- Confirm thread sizes and hose routing against the original brake hose.
- Inspect mating surfaces and replace worn seals during service.
- Bleed the brake system after installation to remove air from the hydraulic circuit.
- Check for leaks and proper pedal response before returning the vehicle to service.
Quality Assurance
Centric brake hydraulic components are part of a broad brake service program that supports master cylinders, wheel cylinders, hoses, repair kits, and power boosters. This hose is DOT approved and built to meet brake hydraulic service requirements for vehicles using the specified connection style.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||