Centric 228.51030 Disc Brake Rotor - Front

Overview of Centric C-TEK Cross-Drilled Disc Brake Rotor

The Centric C-TEK Standard Cross-Drilled Disc Brake Rotor 228.51030 is engineered for Hyundai Tiburon models requiring reliable braking performance. This vented, cross-drilled rotor is designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.

• Cross-drilled surface for improved heat dissipation and reduced brake fade
• Vented rotor design with curved vanes for efficient airflow
• Nominal thickness of 1.024 inches (26.000 mm) with discard thickness at 0.961 inches (24.400 mm)
• Overall height of 1.866 inches (47.400 mm) and outside diameter of 11.929 inches (303.000 mm)
• Floating disc mounting with 5 lug holes (0.492 inch diameter) on a 4.5 inch bolt circle
• ABS tone ring not included; bearings not included
• Weight approximately 19.2 lbs (8.73 kgs)

Product Line Details: C-TEK Standard Cross-Drilled Disc Brake Rotors

The C-TEK Standard Cross-Drilled Disc Brake Rotors by Centric are designed to provide a balance of performance and durability. Featuring cross-drilled surfaces, these rotors help reduce heat buildup and improve braking consistency. The vented design with curved vanes enhances airflow, which aids in cooling during extended use. This product line is suitable for drivers seeking dependable replacement rotors that meet OEM specifications for vehicles like the Hyundai Tiburon.

Technical Description and Specifications

This Centric disc brake rotor (part number 228.51030) is a vented rotor with a cross-drilled surface type, optimized for heat management and brake performance. The rotor’s nominal thickness is 1.024 inches (26.000 mm), with a discard thickness of 0.961 inches (24.400 mm), indicating when replacement is necessary. The overall height measures 1.866 inches (47.400 mm), and the outside diameter is 11.929 inches (303.000 mm). It features a floating disc mounting system with 5 lug holes sized at 0.492 inches (12.5 mm) on a 4.5 inch (114.3 mm) bolt circle diameter. The rotor includes two miscellaneous holes and curved vane style for enhanced cooling efficiency. This rotor does not include an ABS tone ring or bearings.

Compatible Applications and Problem Solving

• Replacement rotor for Hyundai Tiburon models requiring vented, cross-drilled rotors
• Addresses brake fade caused by excessive heat during aggressive driving or towing
• Resolves uneven rotor wear and vibration issues due to improved rotor design
• Helps maintain consistent braking performance under high-stress conditions
• Suitable for restoring OEM braking feel and safety standards

Installation Notes and Tips

• Ensure rotor thickness is above discard thickness (0.961 inches) before installation
• Clean rotor surface to remove any protective coatings prior to mounting
• Verify bolt hole alignment with 5 lug holes on a 4.5 inch bolt circle
• Check compatibility with existing brake pads and calipers on Hyundai Tiburon
• Torque mounting bolts to manufacturer specifications to avoid rotor warping

Quality Assurance and Warranty

Centric provides rotors manufactured to meet or exceed OEM standards, ensuring reliable performance and durability. The C-TEK Standard Cross-Drilled Disc Brake Rotor 228.51030 undergoes rigorous quality control processes. Warranty coverage details should be confirmed with the original product documentation or Centric directly.