/live/media/QR/QR_52140X_Fro.jpg)
Dana Spicer 5-2140X Universal Joint
| Brand | Dana Spicer 5-2140X |
|---|---|
| Position | Front Driveshaft at Front Axle, Rear Driveshaft at Rear Axle, Front Driveshaft at Transfer Case, and Rear Driveshaft at Transmission |
| Bearing Cap Diameter (1) | 1 |
| Bearing Cap Diameter (2) | 1.062 |
| Bearing Cap Diameter A (mm) | 25.4 |
| Bearing Cap Diameter B (mm) | 27 |
| Bearing Cap Type | Round |
| Bearing Cap Type A | Isr |
| Bearing Cap Type B | Osr |
| Converts This Series | 2r |
| Grease Fitting Location | One straight lube fitting in cross |
| Greaseable | Y |
| Hardware Included | N |
| Length A (In) | 2.344 |
| Length A (mm) | 59.5 |
| Length B (In) | 3.219 |
| Length B (mm) | 81.8 |
| Material | Steel |
| OEM Mfg | Spicer |
| Snap Ring Included | Y |
| Snap Ring Type | External, internal |
| SR(1)Brng Cap to Brng Cap(OSR) | 2.344 |
| SR(2)Brng Cap to Brng Cap(OSR) | 3.219 |
| To This Series | 1310 |
| Type | Osr/isr style |
| Fits | — |
OE direct replacement. Genuine Spicer engineering for dependable driveline service.
Greaseable design. One straight lube fitting helps simplify routine maintenance.
Steel construction. Built with round bearing caps and included snap rings.
Cross-references BENDIX PREMIUM BRAKE SHOES 505, SKF UJ505 and Spicer 5-2140X for the same application. See all 12.
Spicer 5-2140X Universal Joint Overview
The Dana Spicer FSGR 5-2140X universal joint is a greaseable driveline service part built with steel construction and OE-style Spicer engineering. It uses an OSR/ISR style design with round bearing caps and snap rings for secure driveline service in compatible driveshaft applications.
For buyers searching for a Dana Spicer universal joint, Spicer 5-2140X, or a drive shaft U-joint for OE replacement service, this part is built around precise cap sizing and series conversion details that matter during driveline repair.
Key Features
- Brand: Dana Spicer FSGR
- Part number: 5-2140X
- Universal joint for driveline and axle service
- OSR/ISR style with round bearing caps
- Greaseable design with one straight lube fitting in the cross
- Steel construction for driveline durability
- Snap rings included; external and internal snap ring types
- Converts from 2R series to 1310 series
- Bearing cap diameters: 1.000 in and 1.062 in
Product Details
The Spicer 5-2140X is a universal joint engineered for driveshaft applications that require accurate cap diameter matching and series conversion. It features a 1.000-inch bearing cap on one side and a 1.062-inch bearing cap on the other, with OSR/ISR style construction and a grease fitting located in the cross for routine lubrication. Spicer’s design, engineering, testing, and manufacturing processes are developed together to support consistent driveline performance in service applications.
This part cross-references SKF UJ505 and Bendix Premium Brake Shoes 505 for the same application. It is a strong search match for drivers looking for Spicer 5-2140X, Dana Spicer 5-2140X, or a universal joint for driveshaft repair on vehicles such as Ford F-150 and Chevrolet Silverado where the correct series and cap dimensions are critical.
Common Problems This Part Can Address
- Driveline vibration caused by worn U-joint bearings
- Clunking or clicking from the driveshaft during acceleration or deceleration
- Excessive play in the universal joint cross
- Grease loss or dry-joint wear in serviceable driveline joints
- Fitment issues when replacing a 2R series joint with a 1310 series configuration
Installation Notes and Tips
Verify bearing cap diameter, series conversion, and snap ring style before installation. Confirm the driveshaft application uses an OSR/ISR style joint and match the cap lengths and diameters to the original part. Clean the yoke bores thoroughly, inspect for wear or distortion, and grease the joint after installation through the straight lube fitting in the cross.
For vehicle-specific service, confirm the driveline application on Ford F-150 and Chevrolet Silverado before ordering the Spicer 5-2140X. Accurate measurement is essential when replacing a universal joint in a driveshaft assembly.
Quality Assurance
Dana Spicer manufactures this universal joint using OE-focused design and testing processes. The Spicer 5-2140X is built to meet the dimensional and material requirements expected in driveline service work, supporting consistent replacement quality for compatible driveshaft repairs.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||