Dayco 5061062 Serpentine Belt - Main Drive

Dayco 5061062 Serpentine Belt Overview

The Dayco 5061062 serpentine belt is a main drive belt built for accessory drive systems that demand consistent grip and stable operation. It uses EPDM construction with aramid reinforcement to help maintain belt integrity across a wide temperature range.

Compatible With 2017-2022 Chevrolet Express 2500, Main Drive; 2017-2022 Chevrolet Express 3500, Main Drive; 2017-2022 GMC Savana 2500, Main Drive; 2017-2022 GMC Savana 3500, Main Drive; and 2015-2022 Ram ProMaster City, Main Drive.

Key Features

• Part number 5061062
• EPDM, aramid reinforced construction
• 6-rib K-section design
• Top width: 0.82 in.
• Effective length: 106.22 in. (2697.99 mm)
• Outside circumference: 106.779 in. (2712.19 mm)
• Black finish with straight rib profile
• Operating temperature range: -45°F to 212°F
• Built to SAE J1459 and SAE J2432 standards

Detailed Description

Dayco 5061062 is a 6-rib serpentine belt for main drive applications in select Chevrolet Express 2500 and 3500 vans, GMC Savana 2500 and 3500 vans, and Ram ProMaster City models. The EPDM rubber compound is paired with aramid reinforcement for added strength in accessory drive service, while the straight rib profile supports consistent pulley contact. If you are replacing a worn Dayco 5061062 belt on a Chevrolet Express 3500 or GMC Savana 2500, verify belt routing and pulley alignment before installation.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Helps Address

• Squealing or chirping from a worn accessory drive belt
• Cracking, glazing, or rib wear on the existing serpentine belt
• Loss of accessory drive performance from belt stretch or contamination
• Incorrect belt length after a previous replacement
• Drive issues on main accessory systems in Express, Savana, and ProMaster City applications

Installation Notes and Tips

Confirm the vehicle’s engine accessory routing before installation and compare the old belt length to the Dayco 5061062 specification. Inspect tensioners, idlers, and pulley surfaces for wear, since a new belt will not correct damaged or misaligned components. Make sure the belt seats fully in each groove before starting the engine.

Quality Assurance

This belt is manufactured to SAE J1459 and SAE J2432 standards and uses EPDM with aramid reinforcement for durability in demanding accessory drive service. Part number 5061062 is specified for the listed main drive applications.