Dayco
Race Performance 20% Underdrive

Dayco PBU1170SS20 Engine Harmonic Balancer

Brand Dayco PBU1170SS20
Bolt Hole Quantity 0
Counterweight Balance Neutral, no counterweight
Crank Bore 1.103
Crank Bore 28.01
Crank Trigger/Exciter Plate No
Hardware Included No
Installation Instructions Included No
Nose Outside Diameter 0
Nose Outside Diameter 0.00
Number of Integrated Pulleys 3
Outer Ring Material Steel
Overall Outside Diameter 126.50
Overall Outside Diameter 4.981
Overall Width 2.461
Overall Width 62.50
Pulley 1 Number Of Grooves 4
Pulley 1 Outside Diameter 3.650
Pulley 1 Outside Diameter 92.700
Pulley 1 Type Serpentine
Pulley 2 Number Of Grooves 4
Pulley 2 Outside Diameter 115.000
Pulley 2 Outside Diameter 4.528
Pulley 2 Type Serpentine
Ring Width 2.176
Ring Width 55.25
Timing Marks Yes
Woodruff Key Included No
Product line Race Performance 20% Underdrive
Fits Acura · 8 vehicles

Race Performance line. Built for reduced accessory drag with a 20% underdrive design.

Steel outer ring. Adds strength and durability to the harmonic balancer.

Neutral balance. No counterweight for a clean, balanced rotating assembly.

Cross-references Pioneer 872062 for the same application. See all 1.

$309.76Free shipping
In stock · usually ships same day before 1pm CST
Step 1 — Confirm fitment
Free return shipping if it doesn't fit when you check fitment here first.
Select your vehicle to confirm fitment
Verify this part fits before purchasing — free returns if it doesn't
Step 2 — Quantity
Order total $309.76
Free shipping to the continental U.S.
Free returns within 60 days if it doesn't fit when fitment is verified.

Dayco Race Performance Underdrive Balancer

The Dayco PBU1170SS20 is a race performance engine harmonic balancer for 1994-2001 Acura Integra applications. It uses a 20% underdrive setup with three integrated pulleys to reduce accessory speed while maintaining neutral balance and timing mark visibility.

Key Features

  • Part number PBU1170SS20 from Dayco Race Performance 20% Underdrive
  • Fits 1994-2001 Acura Integra, N/A
  • Neutral balance design with no counterweight
  • Steel outer ring construction
  • Three integrated pulleys with serpentine groove layouts
  • Timing marks included for setup and service reference
  • Crank bore: 1.103 in. / 28.01 mm
  • Overall outside diameter: 4.981 in. / 126.50 mm
  • Overall width: 2.461 in. / 62.50 mm

Product Details

Dayco’s Race Performance 20% Underdrive line is built for enthusiasts who want a performance-oriented harmonic balancer and pulley assembly in one unit. On the Acura Integra, PBU1170SS20 combines a neutral-balanced balancer with integrated serpentine pulleys to support a cleaner accessory drive layout while preserving timing reference marks for engine service and tuning. This part cross-references Pioneer 872062 for the same application.

Common Issues This Part Can Address

  • Worn or damaged harmonic balancer assembly
  • Accessory drive pulley wear or mismatch
  • Loss of timing mark visibility during service
  • Need for a race-focused underdrive pulley setup
  • Crankshaft vibration control concerns from a failing balancer

Installation Notes

Verify crank bore, pulley alignment, and overall dimensions before installation. Hardware is not included, and installation instructions are not included. Confirm the vehicle is a 1994-2001 Acura Integra before ordering, and inspect the crank snout, keyway area, and accessory belt routing during replacement. Part number PBU1170SS20 should be matched to the intended application before final assembly.

Quality Assurance

Dayco Race Performance components are built for performance-focused engine applications and dimensional consistency. This harmonic balancer includes timing marks and a steel outer ring for serviceable, race-oriented use on the Acura Integra platform.

This part fits 8 vehicles
Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
YearMakeModelSubmodelLitersCylindersPositionNotes
2001AcuraIntegraGS-R1.8LL4N/ARace Performance 20% Underdrive
2000AcuraIntegraGS-R1.8LL4N/ARace Performance 20% Underdrive
1999AcuraIntegraGS-R1.8LL4N/ARace Performance 20% Underdrive
1998AcuraIntegraGS-R1.8LL4N/ARace Performance 20% Underdrive
1997AcuraIntegraGS-R1.8LL4N/ARace Performance 20% Underdrive
1996AcuraIntegra—1.8LL4N/ARace Performance 20% Underdrive
1995AcuraIntegra—1.8LL4N/ARace Performance 20% Underdrive
1994AcuraIntegra—1.8LL4N/ARace Performance 20% Underdrive
Directly replaces or cross-references 1 part number
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.
Pioneer — 872062