/live/media/DE/DE_FE0214_Fro.jpg)
OE Quality
60-Day Returns
Delphi FE0214 Fuel Pump and Strainer Set
Delphi FE0214 Fuel Pump and Strainer Set
Delphi FE0214 is an in-tank electric fuel pump and strainer set built for 12-volt gasoline applications. It delivers standard replacement performance with a 44 psi system pressure rating, 87 psi maximum pressure, and an average flow rating of 32, making it a practical choice for restoring fuel delivery on a 1998 Ford Mustang without California Emission System.
Key Features
- In-tank electric fuel pump for gasoline systems
- 12.0-volt operation with 8 amp average current draw
- 44 psi system pressure and 87 psi maximum pressure
- Average flow rating of 32 for consistent fuel delivery
- Includes strainer, gasket or seal, wiring harness, connector, clips, isolator, and instruction sheet
- Blade terminals, 2 terminals, male terminal gender
- Outlet outside diameter: 0.313 in.; outlet type: hose
- Standard replacement grade from Delphi
Detailed Description
Delphi FE0214 fuel pump and strainer set is engineered for in-tank installation and includes the pump, external strainer, seals, isolator, wire harness and connector, clips, and instruction sheet. Delphi draws on OE heritage and decades of supplier experience to produce aftermarket fuel system components with the fit and function expected for service replacement work. This part cross-references Bosch 67142 and Airtex E2203M for the same application. Compatible with 1998 Ford Mustang fuel system service on vehicles without California Emission System, Delphi FE0214 supports direct replacement needs for this application.
What It Helps Address
- Hard starting caused by weak fuel pressure
- Engine hesitation from inconsistent fuel delivery
- Fuel starvation under load
- No-start conditions related to pump failure
- Noise or wear associated with an aging in-tank pump assembly
Installation Notes and Tips
Fits 1998 Ford Mustang, N/A. Before installing a replacement pump, clean the fuel tank to reduce the chance of debris damaging the new unit; Delphi notes that tank contamination is a leading cause of early fuel pump failure. Use of fuel tank cleaning kit FC01 is recommended for this application. Confirm the vehicle is the non-California Emission System version before ordering.
Quality Assurance
Delphi builds this fuel pump and strainer set using OE experience and application knowledge developed through long-term supplier relationships with major automakers. FE0214 is a standard replacement part intended to meet the needs of service technicians and vehicle owners restoring fuel delivery on the 1998 Ford Mustang.
| Brand | Delphi |
|---|---|
| Part Number | FE0214 |
| Outlet Outside Diameter | 0.313 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Maximum Pressure | 87.0 |
| Terminal Type | Blade |
| Gasket Or Seal Included | Yes |
| Terminal Quantity | 2 |
| Terminal Gender | Male |
| Wiring Harness Included | Yes |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Hose |
| In Tank or External | In tank |
| Internal Or External Strainer | External |
| Average Current Draw | 8 |
| Average Flow Rating | 32 |
| Pump Type | Electric |
| Item Grade | Standard replacement |
| Notes | Fs0114 |
| Package Contents | Fuel pump and strainer set, seals, isolator, wire harness & conn |
| System Pressure | 44 psi |
This part fits 1 vehicles. Search below:
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1998 | Ford | Mustang | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.