/live/media/DE/DE_FE0377_Fro.jpg)
Delphi FE0377 Electric Fuel Pump - In-Tank
| Brand | Delphi FE0377 |
|---|---|
| Position | In-Tank |
| Average Current Draw | 10 |
| Average Flow Rating | 18 |
| Fuel Type | Gas |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Item Grade | Standard Replacement |
| Maximum Pressure | 80.0 |
| Outlet Outside Diameter | 0.313 |
| Outlet Type | Hose |
| Package Contents | Electric Fuel Pump, (2) Hose Clamps, Hose Piece, Isolator, Seal, (2) Splices, 2-Wire Harness w/Connector, Instruction Sheet |
| Strainer Included | No |
| System Pressure | 45 psi |
| Terminal Gender | Male |
| Terminal Quantity | 2 |
| Terminal Type | Blade |
| Voltage | 12 |
| Wiring Harness Included | Yes |
| Fits | Ford · 1 vehicle |
Standard replacement. Built for straightforward fuel pump replacement.
Includes wiring harness. Comes with seal, clamps, splices, and instructions.
OE heritage. Backed by decades of original-equipment experience.
Cross-references Airtex Fuel Pumps E2471, Carter P74123 and Continental 67098 for the same application. See all 16.
Delphi FE0377 Electric Fuel Pump Overview
The Delphi FE0377 is an in-tank electric fuel pump for gasoline applications, built as a standard replacement for select vehicles. It delivers 12-volt operation, up to 80.0 maximum pressure, and a 45 psi system pressure specification for dependable fuel delivery. Fits 1995 Ford Explorer, in-tank.
Key Features
- In-tank electric fuel pump for gas fuel systems
- 12-volt design with blade terminals and 2-terminal male connection
- Maximum pressure rating of 80.0 with 45 psi system pressure
- Average flow rating of 18 and average current draw of 10
- Includes gasket or seal and wiring harness
- Outlet outside diameter measures 0.313 with hose-style outlet
- Package contents include the pump, hose clamps, hose piece, isolator, seal, splices, 2-wire harness with connector, and instruction sheet
Detailed Description
Delphi FE0377 is an in-tank electric fuel pump engineered for gasoline fuel delivery in a standard replacement format. Delphi draws on OE heritage and decades of supplier experience to build aftermarket fuel system parts with the fit and function expected for service replacement work. This part cross-references Airtex Fuel Pumps E2471 and Carter P74123 for the same application. Fits 1995 Ford Explorer, in-tank, and is listed for Mexico-built vehicles with a note to clean the fuel tank before installation to reduce the risk of contamination-related pump failure.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine stalling from inconsistent fuel delivery
- Loss of power under load from insufficient pump output
- No-start conditions related to a failed in-tank pump
- Fuel pressure that falls outside the specified system range
Installation Notes and Tips
Install this pump in the tank position only. Verify the vehicle uses a gasoline fuel system and confirm the blade-terminal, 2-wire connection before installation. Delphi notes that fuel tank contamination is a leading cause of premature pump failure, so cleaning the tank before replacement is recommended; use of fuel tank cleaning kit FC01 is also recommended. Confirm hose routing, seal placement, and electrical connections during service.
Quality Assurance
Delphi builds this fuel pump using OE experience and application knowledge developed through service to major automakers. The FE0377 is a standard replacement part intended to meet the needs of the listed application with the included seal and harness components.
| Year | Make | Model | # Doors | Position | Notes |
|---|---|---|---|---|---|
| 1995 | Ford | Explorer | 4 Door | In-Tank | Mexico Built; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| No rows match your filter. | |||||