Delphi FE0673 Fuel Pump and Strainer Set

Delphi FE0673 Fuel Pump and Strainer Set

Delphi FE0673 is an in-tank electric fuel pump and strainer set built for 12-volt gas applications with a 58 psi system pressure rating and up to 138 psi maximum pressure. It is a standard replacement option for select Chevrolet Cobalt, Pontiac G5, and Saturn Ion models, with OE-focused engineering drawn from Delphi’s long history supplying automakers.

Key Features

• In-tank electric fuel pump for gas fuel systems
• 12.0-volt design with 10 amp average current draw
• 58 psi system pressure and 138 psi maximum pressure
• Includes strainer, seal, and instruction sheet
• Pin-style terminal design with 2 male terminals
• Hose outlet with 0.375 in. outside diameter
• Standard replacement grade for select OE applications

Detailed Description

Delphi FE0673 is engineered as an in-tank fuel pump and strainer set for vehicles that require stable fuel delivery under OE-style operating conditions. The pump is designed for gas fuel systems, uses a pin terminal connection, and includes the external strainer and seal needed for service replacement. With an average flow rating of 23 and a 58 psi system pressure specification, this fuel pump supports consistent fuel supply for the 2007-2010 Chevrolet Cobalt, 2007-2009 Pontiac G5, and 2007 Saturn Ion. Delphi’s OE heritage is reflected in the part’s design approach and broad aftermarket coverage for select model years. This part cross-references Carter P76827 for the same application.

What It Helps Address

• Hard starting caused by weak fuel delivery
• Engine hesitation from low fuel pressure
• Fuel starvation under load or acceleration
• Noise or inconsistent operation from a failing in-tank pump
• Restricted flow from a worn or contaminated strainer

Installation Notes and Tips

Compatible With 2007-2010 Chevrolet Cobalt, in-tank; 2007-2009 Pontiac G5, in-tank; and 2007 Saturn Ion, in-tank. Delphi notes that fuel tank contamination is a leading cause of premature pump failure, so the tank should be cleaned before installing a replacement pump. For these applications, use of fuel tank cleaning kit FC01 is recommended. Verify electrical connector style, outlet routing, and system pressure requirements before installation.

Quality Assurance

Delphi builds this replacement fuel pump using OE experience developed over decades of supplying major automakers. The FE0673 is designed to meet standard replacement needs for select GM compact cars while maintaining the fuel delivery characteristics expected in service.