OE Quality
60-Day Returns

Delphi FE0817 Fuel Pump and Strainer Set
Fuel Pump and Strainer Set for Toyota Venza
Delphi FE0817 is an in-tank electric fuel pump and strainer set built for gasoline applications and confirmed fitment on 2010-2011 Toyota Venza models. It combines a premium-grade pump with a 50-micron strainer to support steady fuel delivery and filtration in the tank.
Key Features
- Fuel pump and strainer set for in-tank installation
- 12.0-volt electric pump for gas fuel systems
- Average flow rating of 32.0 with a maximum pressure of 94.0
- Minimum pressure rating of 43 for fuel system operation
- 50-micron external strainer with white screen
- Rectangle female connector with 2 male blade terminals
- Outlet type: hose; outlet outside diameter: 0.36
- Package contents include fuel pump and strainer set, seal, and instruction sheet
Detailed Description
Delphi FE0817 is a premium electric fuel pump and strainer set engineered for in-tank fuel delivery on gasoline vehicles. Delphi has supplied fuel system components to global vehicle manufacturers for decades, and this part reflects that OE-focused background with a 12-volt design, 7.0 average current draw, and a 32.0 average flow rating. The set is listed for 2010-2011 Toyota Venza applications and cross-references Toyota part numbers 23220-0C301 and 23220-0V010 for the same application. If you are searching for a Toyota Venza fuel pump and strainer set, Delphi FE0817 provides the core components needed for a direct replacement service job.
What It Helps Address
- Hard starting caused by weak fuel delivery
- Fuel starvation from a worn in-tank pump
- Restricted flow from a clogged strainer
- Low fuel pressure conditions in gasoline systems
- Intermittent drivability issues tied to pump wear
Installation Notes and Tips
Fits 2010-2011 Toyota Venza, N/A. Verify tank access, connector style, terminal count, and outlet connection before installation. Replace the unit with the included seal and follow the instruction sheet during service. Because this is an in-tank electric fuel pump, clean the tank and inspect the fuel module area before reassembly to help protect the new strainer.
Quality Assurance
Delphi is a Tier 1 supplier with long-standing fuel system manufacturing experience and extensive OE-related fuel technology development. Delphi FE0817 is built as a premium replacement fuel pump and strainer set for the specified Toyota Venza applications.
| Brand | Delphi |
| Part Number | FE0817 |
| Outlet Outside Diameter | 0.36 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Regulator Included | No |
| Maximum Pressure | 94.0 |
| Terminal Type | Blade |
| Grade Type | Premium |
| Connector Shape | Rectangle |
| Gasket Or Seal Included | No |
| Screen Micron Rating | 50 |
| Terminal Quantity | 2 |
| Strainer Color | White |
| Fuel Pump Type | Electrical |
| Pump Placement | In tank |
| Connector Gender | Female |
| Terminal Gender | Male |
| Wiring Harness Included | No |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Hose |
| Outlet Quantity | 1 |
| In Tank or External | In tank |
| Minimum Pressure | 43 |
| Internal Or External Strainer | External |
| Average Current Draw | 7.0 |
| Fuel Tank Pressure Sensor Included | No |
| Average Flow Rating | 32.0 |
| Pump Type | Electric |
| Package Contents | Fuel pump and strainer set, seal, instruction sheet |
This part fits 2 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Toyota | Venza | 2.7L | L4 | N/A | |
| 2010 | Toyota | Venza | 2.7L | L4 | N/A |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.