/live/media/DE/DE_FG0075_Fro.jpg)
Delphi FG0075 Fuel Pump Module Assembly
| Brand | Delphi FG0075 |
|---|---|
| Average Current Draw | 7 |
| Average Flow Rating | 26 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Gas |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | Internal |
| Item Grade | Standard Replacement |
| Lock Ring Included | No |
| Maximum Pressure | 109.0 |
| Outlet Outside Diameter | 0.375 |
| Outlet Quantity | 3 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Module Assembly w/Float Arm, Seal, Splices, Wire Harness, Instruction Sheet |
| Pump Type | Electric |
| Regulator Included | No |
| Resistance Ohms Empty | 0.1 |
| Resistance Ohms Full | 90.0 |
| Strainer Included | Yes |
| System Pressure | 62 psi |
| Terminal Gender | Male |
| Terminal Quantity | 4 |
| Terminal Type | Pin |
| Vapor Pressure Sensor | No |
| Voltage | 12.0 |
| Fits | Pontiac · 1 vehicle |
Standard replacement. Direct-fit fuel pump module assembly for straightforward service.
OE heritage. Built from 100 years of OE experience and supplier knowledge.
Complete module. Includes a fuel level sender, seal, strainer, and wire harness.
Cross-references 953-5027, 953-5038 and 19180094 for the same application. See all 19.
Fuel Pump Module Assembly for 1997 Grand Prix
Delphi FG0075 is a fuel pump module assembly for the 1997 Pontiac Grand Prix. Built as a standard replacement, it combines the pump, fuel level sender assembly, seal, strainer, wire harness, splices, and float arm in one in-tank unit for gas applications.
Key Features
- 12V electric in-tank fuel pump module assembly
- Maximum pressure rating: 109.0
- System pressure: 62 psi
- Average flow rating: 26
- Fuel level sender assembly included
- Strainer and gasket/seal included
- Quick-connect outlet type with 3 outlets
- 4-pin male terminal design
- Outlet outside diameter: 0.375
- Standard replacement for gas fuel systems
Detailed Description
Delphi FG0075 is engineered for the 1997 Pontiac Grand Prix and reflects Delphi’s OE-focused manufacturing background. The module is built for in-tank installation and uses an electric pump design with a pin-style terminal connection, quick-connect outlet, and internal strainer arrangement. It also includes the fuel level sender assembly, which helps restore fuel delivery and tank level reporting in one service part.
This part cross-references ACDelco 19180094 and Delphi DFG0075 for the same application. The FG0075 part number is also commonly searched as Delphi FG0075 fuel pump module assembly for 1997 Pontiac Grand Prix replacement service.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine stalling from inconsistent fuel delivery
- Fuel gauge readings that no longer track tank level correctly
- Low flow or pressure complaints under load
- Fuel pump noise or intermittent pump operation
Installation Notes and Tips
Fits 1997 Pontiac Grand Prix, N/A. Clean the fuel tank before installing the fuel pump to prevent future seal problems. Verify outlet style, terminal count, and system pressure before installation, and confirm the tank opening and connector condition match the original setup. Delphi FG0075 is an in-tank fuel pump module assembly for gas applications only.
Quality Assurance
Delphi draws on more than 100 years of OE experience and a broad aftermarket portfolio built from supplier knowledge used by major automakers. FG0075 is a standard replacement fuel pump module assembly designed to meet the application requirements of the 1997 Pontiac Grand Prix.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 1997 | Pontiac | Grand Prix | GTP | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| No rows match your filter. | |||||