/live/media/DE/DE_FG0490_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi FG0490 Fuel Pump Module Assembly
| Brand | Delphi FG0490 |
|---|---|
| Average Current Draw | 8 |
| Average Flow Rating | 24 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Flex |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | Internal |
| Item Grade | Standard Replacement |
| Lock Ring Included | No |
| Maximum Pressure | 80.0 |
| Outlet Outside Diameter | 0.375 |
| Outlet Quantity | 2 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Module Assembly w/Float Arm, Seal, Instruction Sheet |
| Pump Type | Electric |
| Regulator Included | Yes |
| Resistance Ohms Empty | 250.0 |
| Resistance Ohms Full | 40.0 |
| Strainer Included | Yes |
| System Pressure | 52 psi |
| Terminal Gender | Male |
| Terminal Quantity | 3 |
| Terminal Type | Blade |
| Vapor Pressure Sensor | Yes |
| Voltage | 12.0 |
| Fits | Chevrolet · 1 vehicle |
Standard replacement. Direct-fit fuel pump module assembly for straightforward service.
OE heritage. Built from 100 years of OE experience and supplier knowledge.
Complete assembly. Includes pump, float arm, seal, strainer, and fuel level sender.
Cross-references Nissens 67507, Spectra Premium SP6405M and 19153003 for the same application. See all 13.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Module Assembly for 2007 Chevrolet Uplander
Delphi FG0490 is an in-tank fuel pump module assembly built for flex-fuel applications and direct replacement service. It combines the pump, fuel level sender, regulator, seal, and strainer in one assembly for the 2007 Chevrolet Uplander.
Key Features
- In-tank electric fuel pump module assembly
- Fits 2007 Chevrolet Uplander
- Fuel type: flex fuel
- Fuel pressure regulator included
- Fuel level sender assembly included
- Strainer and gasket/seal included
- Quick-connect outlet design with 2 outlets
- 12V system with blade terminals
- Maximum pressure rating: 80 psi
- Average flow rating: 24
Detailed Description
Delphi FG0490 is a standard replacement fuel pump module assembly for the 2007 Chevrolet Uplander. It is designed for in-tank installation and includes the pump, float arm, fuel level sender, internal strainer, seal, and pressure regulator. The module uses a 12-volt electric pump with blade terminals, quick-connect outlets, and a vapor pressure sensor. Delphi draws on OE experience and supplier knowledge developed over decades of original equipment work, which is reflected in the design and application coverage of this aftermarket part. This part cross-references Spectra Premium SP6405M and Nissens 67507 for the same application.
Common Fuel System Issues It May Address
- Hard starting or extended cranking from a weak fuel pump
- Fuel pressure loss that affects drivability
- Inaccurate fuel level readings from a worn sender
- Fuel delivery interruptions under load
- Fuel odor or seepage at the tank module seal
Installation Notes and Tips
Before installing the fuel pump module in a 2007 Chevrolet Uplander, clean the fuel tank to help prevent future seal problems. Verify connector style, outlet configuration, and system pressure before installation. Because this is an in-tank module, access is typically through the fuel tank opening and the existing tank components should be inspected for wear or contamination.
Quality Assurance
Delphi builds this FG0490 fuel pump module assembly using OE-based engineering knowledge and aftermarket application coverage developed from long-term original equipment experience. The part is a standard replacement component for fuel delivery service.
| Year | Make | Model | Fuel Type | Wheel Base | Position | Notes |
|---|---|---|---|---|---|---|
| 2007 | Chevrolet | Uplander | FLEX | 113.0" | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| No rows match your filter. | ||||||