/live/media/DE/DE_FG0823_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi FG0823 Fuel Pump Module Assembly
| Brand | Delphi FG0823 |
|---|---|
| Average Current Draw | 5 |
| Average Flow Rating | 30 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Gas |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | External |
| Item Grade | Standard Replacement |
| Lock Ring Included | No |
| Maximum Pressure | 104.0 |
| Outlet Outside Diameter | 0.375 |
| Outlet Quantity | 2 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Module Assembly w/Float Arm, Seal, Clips, Instruction Sheet |
| Pump Type | Electric |
| Regulator Included | No |
| Resistance Ohms Empty | 15.0 |
| Resistance Ohms Full | 160.0 |
| Strainer Included | Yes |
| System Pressure | 44 psi |
| Terminal Gender | Male |
| Terminal Quantity | 4 |
| Terminal Type | Pin |
| Vapor Pressure Sensor | No |
| Voltage | 12.0 |
| Fits | Ford · 6 vehicles |
Standard replacement. Direct-fit fuel pump module assembly for straightforward service.
Electric pump. Delivers consistent fuel flow with 44 psi system pressure.
OE heritage. Built from 100 years of OE experience and supplier knowledge.
Cross-references Airtex Fuel Pumps E2287M, Airtex Fuel Pumps E2318 and Bosch 67136 for the same application. See all 18.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi FG0823 Fuel Pump Module Assembly
Delphi FG0823 is an in-tank electric fuel pump module assembly for gas applications, built for 12-volt systems and standard replacement service. It includes the fuel level sender assembly, gasket or seal, and strainer, making it a direct-fit option for 2000-2005 Ford Excursion models without California Emission System.
- In-tank electric fuel pump module assembly for gas fuel systems
- 12.0-volt operation with a maximum pressure rating of 104.0
- System pressure: 44 psi
- Fuel level sender assembly included for accurate tank level reporting
- Strainer and gasket or seal included
- Quick-connect outlet type with 2 outlets and 0.375 in. outlet outside diameter
- 4-pin male terminal design
- Standard replacement grade for OE-style service
Built from Delphi’s OE heritage and fuel system experience, FG0823 is engineered for consistent fuel delivery and sender performance across the listed Ford Excursion applications. This part cross-references Bosch 67136 for the same application. It is a practical replacement choice for Ford Excursion fuel pump module assembly service when the original unit shows signs of wear, pressure loss, or inaccurate fuel level readings.
Vehicle Fitment
Compatible With 2000-2005 Ford Excursion, N/A, without California Emission System.
Common Problems This Part Can Address
- Hard starting caused by weak fuel delivery
- Engine stalling from inconsistent pump output
- Fuel pressure loss under load
- Inaccurate fuel gauge readings from a failing sender
- Poor drivability related to a worn in-tank pump module
Installation Notes and Tips
Before installing a new fuel pump module assembly in a Ford Excursion, clean the fuel tank to reduce the chance of contamination reaching the replacement pump. Delphi recommends using fuel tank cleaning kit FC01. Verify connector style, outlet configuration, and system requirements before installation, and confirm the vehicle is a non-California Emission System application.
Quality Assurance
Delphi draws on more than a century of OE experience and supplies components to major automakers, with OE-based knowledge built into its aftermarket fuel system parts. FG0823 is a standard replacement fuel pump module assembly for the listed Ford Excursion fitment.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2005 | Ford | Excursion | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 2004 | Ford | Excursion | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 2003 | Ford | Excursion | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 2002 | Ford | Excursion | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 2001 | Ford | Excursion | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 2000 | Ford | Excursion | N/A | without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| No rows match your filter. | ||||