/live/media/DE/DE_FG1880_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi FG1880 Fuel Pump Module Assembly
| Brand | Delphi FG1880 |
|---|---|
| Outlet Outside Diameter | 0.313 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Regulator Included | Yes |
| Maximum Pressure | 84.0 |
| Terminal Type | Blade |
| Gasket Or Seal Included | Yes |
| Terminal Quantity | 4 |
| Lock Ring Included | No |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Outlet Quantity | 2 |
| In Tank or External | In tank |
| Resistance Ohms Empty | 90.0 |
| Resistance Ohms Full | 0.1 |
| Internal Or External Strainer | Internal |
| Average Current Draw | 10 |
| Pump Type | Electric |
| Fuel Level Sender Assembly Included | Yes |
| Item Grade | Standard replacement |
| Package Contents | Fuel pump module assembly w/float arm, seal, instruction sheet |
| System Pressure | 70 psi |
| Vapor Pressure Sensor | No |
| Product line | Discontinued |
| Fits | Hyundai · 4 vehicles |
OE heritage. Built from Delphi's century of OE experience in fuel system engineering.
Complete module design. Includes the pump, sender, regulator, seal, and strainer in one assembly.
Standard replacement. A service-ready fuel pump module for gasoline in-tank applications.
Cross-references 31110-2M700, 31111-2M000 and 94460-2M400 for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Module Overview
The Delphi FG1880 fuel pump module assembly is a standard replacement for gas-powered applications that need in-tank fuel delivery with integrated level sensing. It combines the pump, regulator, strainer, seal, and sender assembly in one unit for a direct service replacement.
Fits 2013-2016 Hyundai Genesis Coupe, N/A.
- 12-volt electric in-tank fuel pump module for gasoline systems
- Includes fuel level sender assembly and regulator
- Quick-connect outlet with blade terminals for service-friendly connection
- Internal strainer and gasket or seal included
- Maximum pressure rated at 84.0 for fuel system service
Detailed Product Information
Built under Delphi part number FG1880, this fuel pump module assembly is engineered for vehicles that use an in-tank electric pump with a float arm sender. The module is configured for gasoline fuel systems and includes two outlets, a quick-connect outlet type, and a male blade terminal layout with four terminals. Delphi FG1880 also includes the fuel level sender assembly, which helps restore both fuel delivery and tank level reporting in one repair.
This part cross-references Hyundai/Kia OE numbers 31110-2M700 and 31111-2M000 for the same application.
Common Repair Symptoms
- Hard starting or extended cranking from weak fuel delivery
- Engine stalling caused by inconsistent pump output
- Incorrect fuel gauge readings from a worn sender assembly
- Fuel pressure loss in an in-tank gasoline system
- Seal-related leaks after tank service when the module is replaced
Installation Notes
Clean the fuel tank before installation to reduce the risk of future seal problems, as noted by the fitment data. Verify electrical connector style, outlet routing, and system pressure requirements before installation. This module uses an internal strainer and a quick-connect outlet, so confirm the fuel line connection matches the vehicle’s original setup.
Quality Assurance
Delphi brings 100 years of OE experience and supplier knowledge from work with major automakers into its aftermarket fuel system parts. FG1880 is a standard replacement module built from that OE heritage and broad vehicle coverage.
| Year | Make | Model | Notes |
|---|---|---|---|
| 2016 | Hyundai | Genesis Coupe | Clean fuel tank before installing fuel pump to prevent future seal problems.; Discontinued |
| 2015 | Hyundai | Genesis Coupe | Clean fuel tank before installing fuel pump to prevent future seal problems.; Discontinued |
| 2014 | Hyundai | Genesis Coupe | Clean fuel tank before installing fuel pump to prevent future seal problems.; Discontinued |
| 2013 | Hyundai | Genesis Coupe | Clean fuel tank before installing fuel pump to prevent future seal problems.; Discontinued |
| No rows match your filter. | |||