/live/media/DE/DE_FG2146_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi FG2146 Fuel Pump Module Assembly
| Brand | Delphi FG2146 |
|---|---|
| Average Current Draw | 10 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Gas |
| Gasket Or Seal Included | No |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | Internal |
| Item Grade | Standard Replacement |
| Lock Ring Included | No |
| Outlet Outside Diameter | 0.313 |
| Outlet Quantity | 2 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Module Assembly w/Float Arm, Instruction Sheet |
| Pump Type | Electric |
| Regulator Included | No |
| Resistance Ohms Empty | 15.0 |
| Resistance Ohms Full | 410.0 |
| Strainer Included | Yes |
| System Pressure | 44 psi |
| Terminal Gender | Male |
| Terminal Quantity | 4 |
| Terminal Type | Blade |
| Vapor Pressure Sensor | No |
| Voltage | 12.0 |
| Fits | Toyota · 8 vehicles |
Standard replacement. Direct-fit fuel pump module assembly for straightforward service.
Electric pump. Delivers 44 psi with a 12-volt, gas-fuel design.
Strainer included. Built with a quick-connect outlet and blade terminals.
Cross-references Airtex Fuel Pumps E8756M, Carter P76605M and 77020-04100 for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Module for Tacoma
The Delphi FG2146 fuel pump module assembly is a standard replacement for select Toyota Tacoma applications. Built for in-tank use with a 12-volt electric pump, it supports consistent fuel delivery and includes the fuel level sender assembly and float arm for a complete tank-side service.
Key Features
- Fits 2016 Toyota Tacoma, 2017-2021 Toyota Tacoma, and 2022-2023 Toyota Tacoma
- In-tank fuel pump module assembly for gas applications
- 12.0V electric pump with 44 psi system pressure
- Fuel level sender assembly included with float arm
- Strainer included; internal strainer design
- Quick-connect outlet with 2 outlets and blade terminals
- Standard replacement part built from Delphi OE heritage and application knowledge
Detailed Description
Delphi FG2146 is engineered as an OE-style fuel pump module assembly for Toyota Tacoma models from 2016 through 2023. It is built for in-tank installation and uses a gas-compatible electric pump with a 44 psi system pressure rating, 10 amp average current draw, and a 4-terminal blade connection. The module includes the fuel level sender assembly, helping restore both fuel delivery and tank level reporting in one service part. Delphi draws on more than 100 years of OE experience and a broad aftermarket portfolio to support vehicle-specific replacement needs. This part cross-references Airtex Fuel Pumps E8756M and Carter P76605M for the same application. Delphi FG2146 is a direct-fit choice for Tacoma fuel system repair when the original module has failed or fuel level readings have become inaccurate.
What It Helps Fix
- Hard starting caused by weak or inconsistent fuel pressure
- Engine stalling from fuel delivery loss inside the tank
- Fuel gauge errors tied to a failing sender assembly
- Low fuel pressure complaints under load or acceleration
- Noise or wear associated with an aging in-tank pump module
Installation Notes and Tips
Fits 2016 Toyota Tacoma, 2017-2021 Toyota Tacoma, and 2022-2023 Toyota Tacoma. For 2016 Tacoma models built from 08/2015, Toyota notes that fuel tank contamination is a leading cause of premature pump failure; cleaning the tank before installation is recommended, and use of fuel tank cleaning kit FC01 is recommended. For 2017-2021 Tacoma applications, clean the fuel tank before installing the fuel pump to help prevent future seal problems. Gasket or seal and lock ring are not included, so verify the condition of the existing tank components before service.
Quality Assurance
Delphi builds this replacement module using OE-focused engineering knowledge developed through long-term supplier experience with major automakers. The FG2146 is a standard replacement fuel pump module assembly for Tacoma owners who need a direct-fit service part backed by Delphi’s OE heritage.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2023 | Toyota | Tacoma | 2.7L | L4 | N/A | — |
| 2022 | Toyota | Tacoma | 2.7L | L4 | N/A | — |
| 2021 | Toyota | Tacoma | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2020 | Toyota | Tacoma | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2019 | Toyota | Tacoma | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2018 | Toyota | Tacoma | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2017 | Toyota | Tacoma | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2016 | Toyota | Tacoma | — | — | N/A | From 08/2015; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| No rows match your filter. | ||||||