/live/media/DE/DE_FG2317_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi FG2317 Fuel Pump Module Assembly
| Brand | Delphi FG2317 |
|---|---|
| Outlet Outside Diameter | 0.375 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Regulator Included | Yes |
| Terminal Type | Blade |
| Gasket Or Seal Included | No |
| Terminal Quantity | 5 |
| Lock Ring Included | No |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Outlet Quantity | 2 |
| In Tank or External | In tank |
| Resistance Ohms Empty | 280.0 |
| Resistance Ohms Full | 46.0 |
| Minimum Pressure | 74.0 |
| Internal Or External Strainer | Internal |
| Average Current Draw | 13 |
| Average Flow Rating | 37 |
| Pump Type | Electric |
| Fuel Level Sender Assembly Included | Yes |
| Item Grade | Standard replacement |
| Package Contents | Fuel pump module assembly w/float arm, instruction sheet |
| System Pressure | 73 psi |
| Vapor Pressure Sensor | No |
| Fits | INFINITI and Nissan · 17 vehicles |
Standard replacement. Built as a direct-fit fuel pump module assembly for straightforward service.
OE heritage. Backed by 100 years of OE experience and supplier knowledge.
Complete module. Includes a strainer, regulator, and fuel level sender assembly.
Cross-references 17040-3ZD0B and FFG2317 for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Module Assembly for Armada and QX80
Delphi FG2317 is a fuel pump module assembly for select Nissan Armada and INFINITI QX80 applications. It combines the pump, fuel level sender assembly, regulator, and internal strainer in an in-tank design for direct replacement service.
Key Features
- 12-volt electric fuel pump module assembly for gasoline applications
- In-tank design with quick-connect outlet and two outlet ports
- Fuel pressure regulator included for system control
- Fuel level sender assembly included with blade-style, 5-terminal male connection
- Internal strainer included; gasket/seal and lock ring are not included
- Standard replacement part built from Delphi OE heritage and application knowledge
- Average flow rating of 37 and system pressure of 73 psi
Detailed Description
Delphi FG2317 is engineered as a standard replacement fuel pump module assembly for 2020-2024 Nissan Armada, 2017-2024 INFINITI QX80, and 2016 INFINITI QX80 from 05/2016. It is built for in-tank installation and uses a quick-connect outlet with a 0.375-inch outside diameter. The assembly includes the fuel pump, regulator, strainer, and fuel level sender assembly, helping restore fuel delivery and tank level reporting in one service part. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons for Replacement
- Hard starting or extended cranking caused by weak fuel delivery
- Engine hesitation, stumble, or loss of power under load
- Inaccurate fuel gauge readings from a worn sender assembly
- Fuel pressure that falls below the required 73 psi system pressure
- Pump noise or intermittent operation from an aging in-tank module
Installation Notes and Tips
Before installing a replacement pump on 2017-2019 Nissan Armada and INFINITI QX80 applications, clean the fuel tank to reduce the risk of seal problems and premature failure. For the 2016 INFINITI QX80 from 05/2016, tank contamination is a known cause of early pump failure, and Delphi recommends cleaning the tank before installation; use of fuel tank cleaning kit FC01 is recommended. Verify connector style, outlet configuration, and fuel system pressure before installation.
Quality Assurance
Delphi draws on more than 100 years of OE experience and supplier knowledge used by major automakers. That OE background is reflected in the design and application coverage of FG2317, including fitment for select Nissan Armada and INFINITI QX80 model years.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2024 | INFINITI | QX80 | 5.6L | V8 | N/A | — |
| 2024 | Nissan | Armada | 5.6L | V8 | N/A | — |
| 2023 | INFINITI | QX80 | — | — | N/A | — |
| 2023 | Nissan | Armada | — | — | N/A | — |
| 2022 | INFINITI | QX80 | — | — | N/A | — |
| 2022 | Nissan | Armada | — | — | N/A | — |
| 2021 | INFINITI | QX80 | — | — | N/A | — |
| 2021 | Nissan | Armada | — | — | N/A | — |
| 2020 | INFINITI | QX80 | — | — | N/A | — |
| 2020 | Nissan | Armada | — | — | N/A | — |
| 2019 | INFINITI | QX80 | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2019 | Nissan | Armada | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2018 | INFINITI | QX80 | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2018 | Nissan | Armada | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2017 | INFINITI | QX80 | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2017 | Nissan | Armada | — | — | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| 2016 | INFINITI | QX80 | — | — | N/A | From 05/2016; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| No rows match your filter. | ||||||