Delphi HP10006 Fuel Pump Hanger Assembly

Delphi Fuel Pump Hanger Assembly Overview

The Delphi HP10006 fuel pump hanger assembly is designed for reliable fuel delivery in select Buick and Oldsmobile vehicles. Engineered for gas fuel systems, this in-tank electric fuel pump assembly ensures consistent pressure and flow for optimal engine performance.

• Compatible with Buick Century, Oldsmobile Cutlass Ciera, and Cutlass Cruiser models
• 12.0 Volt electric pump with a maximum pressure of 65 psi and system pressure of 44 psi
• Includes fuel level sender assembly, external strainer, and gasket seal for secure installation
• Features 4 female pin terminals and quick connect outlet with 0.375 inch outside diameter
• Average flow rating of 30 and average current draw of 4 amps for efficient operation

Technical Specifications and Features

The HP10006 fuel pump hanger assembly operates at 12 volts and is designed specifically for gasoline fuel systems. It delivers a maximum pressure of 65 psi with a system pressure rating of 44 psi, ensuring steady fuel supply under various driving conditions. The assembly includes an external strainer inlet type and a quick connect outlet type with three outlets, each having an outside diameter of 0.375 inches. The unit features four female pin terminals, providing secure electrical connections. Resistance values range from 1.0 ohm when empty to 90.0 ohms when full, supporting accurate fuel level readings through the included fuel level sender assembly. This standard replacement grade part comes complete with a gasket or seal and lock ring for proper sealing within the fuel tank.

Compatible Vehicles and Applications

This fuel pump hanger assembly is compatible with the following vehicles:

• Buick Century
• Oldsmobile Cutlass Ciera
• Oldsmobile Cutlass Cruiser

It is designed to replace the original in-tank fuel pump assembly, addressing issues related to fuel delivery and level sensing in these specific models.

Common Issues Addressed by the HP10006 Fuel Pump Hanger Assembly

• Intermittent or no fuel delivery causing engine stalling or failure to start
• Inaccurate fuel level readings due to faulty sender assembly
• Fuel leaks or pressure loss from worn seals or connectors
• Electrical connection failures from damaged terminals
• Reduced fuel flow affecting engine performance and efficiency

Installation Notes and Tips

Installation of the Delphi HP10006 requires removal of the fuel tank to access the in-tank assembly. Ensure the gasket or seal included is properly seated to prevent leaks. Verify that the four female pin terminals are securely connected and that the quick connect outlets are properly engaged. It is recommended to inspect the fuel strainer for debris and replace if necessary. Follow vehicle-specific service manual instructions for safe handling and installation procedures.

Quality Assurance and Warranty

Delphi manufactures the HP10006 fuel pump hanger assembly to meet standard replacement specifications, ensuring compatibility and reliable operation. The assembly includes a fuel level sender and strainer to maintain system integrity. While specific warranty details are not provided, Delphi parts typically come with manufacturer-backed quality assurance to support durability and performance in Buick and Oldsmobile applications.