/live/media/DE/DE_HP10164_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi HP10164 Fuel Pump Hanger Assembly
| Brand | Delphi HP10164 |
|---|---|
| Average Current Draw | 6 |
| Average Flow Rating | 29 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Gas |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | External |
| Item Grade | Standard Replacement |
| Maximum Pressure | 6.5 |
| Outlet Outside Diameter | 0.375 |
| Outlet Quantity | 2 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Hanger Assembly w/Float Arm, Seal, Lock Ring, Instruction Sheet |
| Pump Type | Electric |
| Resistance Ohms Empty | 70.0 |
| Resistance Ohms Full | 10.0 |
| Strainer Included | Yes |
| System Pressure | 4.5 psi |
| Terminal Gender | Male |
| Terminal Quantity | 4 |
| Terminal Type | Pin |
| Voltage | 12.0 |
| Fits | Ford · 5 vehicles |
Standard replacement. Built as a direct-fit fuel pump hanger assembly.
OE heritage. Backed by 100 years of OE experience and supplier knowledge.
Complete assembly. Includes seal, lock ring, strainer, and fuel level sender.
Cross-references Airtex Fuel Pumps E2094S, Airtex Fuel Pumps E2486 and Spectra Premium SP381H for the same application. See all 14.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi HP10164 Fuel Pump Hanger Assembly
Delphi HP10164 is an in-tank fuel pump hanger assembly for gasoline applications, built for 12-volt systems and standard replacement service. It combines the fuel pump, fuel level sender assembly, seal, lock ring, and strainer support in one OE-style service part for 1986-1988 Ford Ranger midship tank applications.
- In-tank electric fuel pump hanger assembly for gas fuel systems
- 12.0-volt operation with 6.5 maximum pressure and 4.5 psi system pressure
- Average flow rating of 29 with 6-amp average current draw
- Includes fuel level sender assembly, gasket or seal, and strainer
- Quick-connect outlet design with two outlets and 0.375 in. outlet outside diameter
- Pin terminal design with 4 terminals and male terminal gender
- Resistance range: 70 ohms empty, 10 ohms full
OE-Style Construction and Fitment
Delphi draws on more than a century of OE experience and applies that knowledge to aftermarket fuel system parts. The HP10164 is a standard replacement fuel pump hanger assembly for Ford Ranger models from 1986-1988, including vehicles with a midship tank. This part number, HP10164, is built for direct service in the fuel tank and is also referenced by cross numbers such as EHP10164 and P74547S for the same application.
Common Fuel System Issues It Can Address
- Hard starting caused by weak or inconsistent fuel delivery
- Fuel gauge readings that are inaccurate due to sender wear
- Low fuel pressure from an aging in-tank pump assembly
- Fuel starvation or hesitation under load
- Contamination-related pump wear in a midship tank setup
Installation Notes and Tips
Fits 1986-1988 Ford Ranger, N/A. For vehicles with a midship tank, clean the fuel tank before installing a new pump assembly to reduce contamination and premature failure. Verify outlet style, terminal layout, and sender resistance before installation, and confirm the seal and lock ring are properly seated during reassembly. The package contents for HP10164 include the fuel pump hanger assembly with float arm, seal, lock ring, and instruction sheet.
Quality Assurance
Delphi fuel system components are backed by OE heritage and application knowledge developed through long-term supplier experience with major automakers. HP10164 is engineered as a standard replacement part for consistent service in Ford Ranger fuel system repairs.
| Year | Make | Model | Body Type | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|
| 1988 | Ford | Ranger | Extended Cab Pickup | — | N/A | For vehicles with a Midship Tank, it is suggested to clean the fuel tank before installing a new fuel pump to reduce the risk of contamination and premature failure; Consider using a fuel tank cleaning kit FC01. |
| 1987 | Ford | Ranger | Extended Cab Pickup | — | N/A | For vehicles with a Midship Tank, it is suggested to clean the fuel tank before installing a new fuel pump to reduce the risk of contamination and premature failure; Consider using a fuel tank cleaning kit FC01. |
| 1987 | Ford | Ranger | Extended Cab Pickup | GAS | N/A | For vehicles with a Midship Tank, it is suggested to clean the fuel tank before installing a new fuel pump to reduce the risk of contamination and premature failure; Consider using a fuel tank cleaning kit FC01. |
| 1986 | Ford | Ranger | Extended Cab Pickup | — | N/A | For vehicles with a Midship Tank, it is suggested to clean the fuel tank before installing a new fuel pump to reduce the risk of contamination and premature failure; Consider using a fuel tank cleaning kit FC01. |
| 1986 | Ford | Ranger | Extended Cab Pickup | GAS | N/A | For vehicles with a Midship Tank, it is suggested to clean the fuel tank before installing a new fuel pump to reduce the risk of contamination and premature failure; Consider using a fuel tank cleaning kit FC01. |
| No rows match your filter. | ||||||