/live/media/DE/DE_HP10226_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi HP10226 Fuel Pump Hanger Assembly
| Brand | Delphi HP10226 |
|---|---|
| Average Current Draw | 6 |
| Average Flow Rating | 34 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Flex |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | External |
| Item Grade | Standard Replacement |
| Maximum Pressure | 80.0 |
| Outlet Outside Diameter | 0.375 |
| Outlet Quantity | 2 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Hanger Assembly w/Float Arm, Seal, (2) Retainer Clips, Instruction Sheet |
| Pump Type | Electric |
| Resistance Ohms Empty | 7.0 |
| Resistance Ohms Full | 140.0 |
| Strainer Included | Yes |
| System Pressure | 58 psi |
| Terminal Gender | Male |
| Terminal Quantity | 8 |
| Terminal Type | Pin |
| Voltage | 12.0 |
| Fits | Ford · 1 vehicle |
Standard replacement. Built as a direct-fit fuel pump hanger assembly.
Includes key components. Comes with a seal, strainer, float arm, and fuel level sender.
OE heritage. Backed by Delphi's century of original-equipment experience.
Cross-references 67148, A30353 and DHP10226 for the same application. See all 13.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Fuel Pump Hanger Assembly for Ford Ranger
Delphi HP10226 is a standard replacement fuel pump hanger assembly for the 1999 Ford Ranger. It combines the fuel pump, fuel level sender, strainer, seal, and hanger components needed for in-tank fuel delivery service on flex-fuel applications.
Key Features
- In-tank electric fuel pump hanger assembly with 12.0-volt operation
- Maximum pressure rating of 80.0 and system pressure of 58 psi
- Average flow rating of 34 with average current draw of 6
- Fuel level sender assembly included with resistance range of 7.0 ohms empty to 140.0 ohms full
- Quick-connect outlet design with two outlets and 0.375-inch outlet outside diameter
- Strainer and gasket or seal included for service replacement
- Male pin terminals, 8 terminal quantity
- Built for flex fuel systems
Detailed Description
Delphi HP10226 is engineered as an OE-style fuel pump hanger assembly for the 1999 Ford Ranger. Delphi draws on long-term original equipment experience and a broad aftermarket portfolio, bringing OE heritage and application knowledge to this fuel system component. The assembly is designed for in-tank installation and includes the fuel pump hanger, float arm, seal, strainer, and fuel level sender assembly for a complete service replacement.
This part cross-references Monroe Shocks & Struts (e.g., 67148, A30353) for the same application. For buyers searching for a 1999 Ford Ranger fuel pump hanger assembly, Ford Ranger in-tank fuel pump replacement, or Delphi HP10226 fuel sender and pump assembly, this part matches the listed vehicle application and fuel system requirements.
Common Problems This Part Can Address
- Hard starting caused by weak or failing in-tank fuel delivery
- Fuel gauge inaccuracies from a worn sender assembly
- Low fuel pressure or inconsistent pressure at the rail
- Engine hesitation or stalling related to fuel starvation
- Fuel system service needs after tank contamination or internal wear
Installation Notes and Tips
Fits 1999 Ford Ranger, N/A. Clean the fuel tank before installing the fuel pump to prevent future seal problems. Verify connector style, outlet configuration, and system pressure requirements before installation. Always confirm the tank is clean and free of debris so the strainer and seal can seat properly.
Quality Assurance
Delphi builds this fuel pump hanger assembly using OE experience and application-specific engineering developed from supplying original equipment to major automakers. HP10226 is a standard replacement part intended to restore fuel delivery performance on the listed Ford Ranger application.
| Year | Make | Model | Fuel Type | Wheel Base | Position | Notes |
|---|---|---|---|---|---|---|
| 1999 | Ford | Ranger | FLEX | 112.0" | N/A | Clean fuel tank before installing fuel pump to prevent future seal problems. |
| No rows match your filter. | ||||||