Delphi HP10262 Fuel Pump Hanger Assembly

Delphi Fuel Pump Hanger Assembly Overview

The Delphi HP10262 fuel pump hanger assembly is designed for reliable fuel delivery in Ford trucks, including the F-150, F-250, F-250 HD, and F-350 models. This in-tank electric fuel pump assembly ensures consistent fuel pressure and flow for gasoline engines, supporting optimal engine performance.

• Compatible with Ford F-150, F-250, F-250 HD, and F-350 models
• Electric fuel pump with 12.0 volts operation
• Maximum pressure rating of 70 psi and system pressure of 45 psi
• Includes fuel level sender assembly with float arm
• Features external strainer inlet and quick connect outlet (0.375 inch diameter)
• Four male blade terminals with jumper harness included
• Standard replacement grade with gasket and seal included
• Average flow rating of 24 gallons per hour and average current draw of 10 amps

Technical Details and Specifications

The Delphi HP10262 fuel pump hanger assembly operates at 12 volts and is designed specifically for gasoline fuel systems. It features an external strainer inlet type and a quick connect outlet with a 0.375-inch outside diameter, ensuring secure and efficient fuel flow. The assembly includes a fuel level sender with a float arm, providing accurate fuel level readings. With a maximum pressure of 70 psi and a system pressure of 45 psi, this electric pump maintains consistent fuel delivery under various operating conditions. The four male blade terminals facilitate easy electrical connections, supported by the included jumper harness and lock ring for secure installation.

Applications and Problem Resolution

This fuel pump hanger assembly is intended for use in Ford trucks requiring a reliable in-tank fuel pump solution. It addresses common fuel system issues such as:

• Intermittent or low fuel pressure causing engine performance problems
• Faulty fuel level readings due to damaged sender assemblies
• Fuel pump failure resulting in engine stalling or no-start conditions
• Clogged or damaged strainers reducing fuel flow
• Electrical connection issues with worn or corroded terminals

Installation Notes and Tips

When installing the Delphi HP10262 fuel pump hanger assembly, ensure the vehicle’s fuel tank is properly drained and depressurized. Use the included gasket and seal to prevent leaks and verify that the external strainer is correctly positioned to avoid fuel contamination. Confirm all four blade terminals are securely connected using the jumper harness, and tighten the lock ring to secure the assembly in the tank. It is recommended to inspect the fuel lines and connectors for wear during installation to maintain system integrity.

Quality Assurance and Warranty

Delphi manufactures the HP10262 fuel pump hanger assembly to meet standard replacement grade specifications, ensuring dependable performance and durability. The assembly includes a gasket and seal for leak prevention and is tested for electrical resistance and flow ratings to meet OEM requirements. Warranty coverage details should be confirmed with the point of purchase or Delphi directly.