/live/media/DE/DE_HP10274_Fro.jpg)
Delphi HP10274 Fuel Pump Hanger Assembly
| Brand | Delphi HP10274 |
|---|---|
| Average Current Draw | 10 |
| Average Flow Rating | 21 |
| Fuel Level Sender Assembly Included | Yes |
| Fuel Type | Gas |
| Gasket Or Seal Included | Yes |
| In Tank or External | In Tank |
| Inlet Type | Strainer |
| Internal Or External Strainer | External |
| Item Grade | Standard Replacement |
| Maximum Pressure | 113.0 |
| Outlet Outside Diameter | 0.375 |
| Outlet Quantity | 2 |
| Outlet Type | Quick Connect |
| Package Contents | Fuel Pump Hanger Assembly w/Float Arm, Lock Ring, Retainers, Screws, Seal, Instruction Sheet |
| Pump Type | Electric |
| Resistance Ohms Empty | 15.0 |
| Resistance Ohms Full | 160.0 |
| Strainer Included | Yes |
| System Pressure | 43 psi |
| Terminal Gender | Male |
| Terminal Quantity | 4 |
| Terminal Type | Pin |
| Voltage | 12.0 |
| Fits | Ford · 6 vehicles |
Standard replacement. Direct-fit fuel pump hanger assembly for straightforward service.
Electric fuel pump. Delivers 12-volt operation with a 43 psi system pressure rating.
Complete assembly. Includes a strainer, seal, and fuel level sender assembly.
Cross-references Airtex Fuel Pumps E2059MN, Bosch 67000 and Carter P74107 for the same application. See all 12.
Fuel Pump Hanger Assembly for Ford Trucks
Delphi HP10274 is an in-tank fuel pump hanger assembly built for gasoline applications that require stable fuel delivery and accurate fuel level reporting. It is a standard replacement for select 1990-1991 Ford F-150, Ford F-250, and Ford F-350 models with a 19 gallon steel midship tank.
Key Features
- In-tank electric fuel pump hanger assembly for gas applications
- 12-volt design with a maximum pressure rating of 113.0
- System pressure rated at 43 psi with an average flow rating of 21
- Fuel level sender assembly included for gauge operation
- External strainer and fuel strainer included
- Quick-connect outlet design with two outlets and 0.375 in. outlet outside diameter
- Pin-style, 4-terminal male electrical connection
- Gasket or seal included for installation
Detailed Description
Delphi HP10274 fuel pump hanger assembly is engineered for Ford F-150, Ford F-250, and Ford F-350 trucks that use the specified 19 gallon steel midship tank configuration. It combines the pump, hanger, float arm, and fuel level sender into one replacement assembly to restore fuel delivery and tank level signal performance. Delphi draws on OE heritage and decades of supplier experience, bringing production knowledge from original equipment applications into the aftermarket part.
This part cross-references Bosch 67000 and Carter P74107 for the same application. It is also referenced by part number HP10274 in service and catalog listings.
What It Helps Fix
- Hard starting caused by weak or inconsistent fuel delivery
- Engine hesitation or stalling from low fuel pressure
- Inaccurate fuel gauge readings from a worn sender assembly
- Fuel starvation issues related to an aging in-tank pump assembly
- Noise or performance loss from a deteriorated hanger-mounted pump unit
Installation Notes and Tips
Fits 1990-1991 Ford F-150, N/A; 1990-1991 Ford F-250, N/A; and 1990-1991 Ford F-350, N/A, with 19 gallon tank and steel midship tank. Before installation, clean the fuel tank to reduce the risk of contamination damaging the replacement pump. Delphi recommends using fuel tank cleaning kit FC01 for this application. Confirm electrical connector style, outlet configuration, and tank setup before installation.
Quality Assurance
Delphi builds this fuel pump hanger assembly with OE-based engineering knowledge and a broad aftermarket portfolio developed from original equipment experience. The part includes the seal, strainer, and fuel level sender assembly specified for this application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1991 | Ford | F-150 | N/A | with 19 Gallon Tank; with Steel Midship Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 1991 | Ford | F-250 | N/A | with 19 Gallon Tank; with Steel Midship Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 1991 | Ford | F-350 | N/A | with 19 Gallon Tank; with Steel Midship Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 1990 | Ford | F-150 | N/A | with 19 Gallon Tank; with Steel Midship Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 1990 | Ford | F-250 | N/A | with 19 Gallon Tank; with Steel Midship Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| 1990 | Ford | F-350 | N/A | with 19 Gallon Tank; with Steel Midship Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, it’s recommended to clean the fuel tank before installing a new pump.; Use of fuel tank cleaning kit FC01 is recommended. |
| No rows match your filter. | ||||