/live/media/DE/DE_HP10284_Fro.jpg)
Delphi HP10284 Fuel Pump Hanger Assembly
| Brand | Delphi HP10284 |
|---|---|
| Material | Metal |
| Fuel Sending Unit Included | Yes |
| Negative Ground | No |
| Outlet Outside Diameter | 0.38 |
| Voltage | 12.0 |
| Fuel Type | Gas |
| Maximum Pressure | 87.00 |
| Terminal Type | Blade |
| Mounting Hardware Included | No |
| Universal Or Specific Fit | Specific |
| Grade Type | Premium |
| Connector Shape | Round |
| Gasket Or Seal Included | Yes |
| Terminal Quantity | 4 |
| Lock Ring Included | No |
| Connector Gender | Female |
| Terminal Gender | Male |
| Strainer Included | Yes |
| Inlet Type | Strainer |
| Outlet Type | Quick connect |
| Inlet Quantity | 1 |
| Outlet Quantity | 2 |
| In Tank or External | In tank |
| Fuel Pump Included | Yes |
| Resistance Ohms Empty | 15.0 |
| Resistance Ohms Full | 160.0 |
| Gasket Or Seal Material | Nitrile rubber |
| Minimum Pressure | 44 |
| Internal Or External Strainer | External |
| Pump Design | Turbine |
| Fits | — |
Fuel pump included. Complete in-tank hanger assembly with float arm and seal.
Premium Delphi engineering. Built by a long-time OE supplier with decades of fuel system expertise.
Specific-fit design. Made for a direct, application-matched replacement.
Cross-references Carter P76545S, Spectra Premium SP2091H and 5U9Z9H307AA for the same application. See all 4.
Delphi HP10284 Fuel Pump Hanger Assembly
Delphi HP10284 is a premium in-tank fuel pump hanger assembly with a fuel sending unit, seal, strainer, and electric turbine-style pump. Built with a metal housing and specific-fit design, it supports consistent fuel delivery for gas applications and is a direct replacement choice for select vehicle platforms, including Ford Mustang and Ford F-150 applications where this part number is specified.
Key Features
- Fuel pump hanger assembly with float arm and fuel sending unit included
- In-tank electric pump with turbine design for gas fuel systems
- Specific-fit replacement for targeted vehicle applications
- Quick-connect outlet design with 2 outlets and 1 inlet
- Includes seal, strainer, and instruction sheet
- Metal construction with 12V operation and blade terminals
- Delphi HP10284 cross-references Carter P76545S and Spectra Premium SP2091H
Detailed Description
The Delphi HP10284 fuel pump hanger assembly is engineered for vehicles that require an in-tank fuel delivery module with an integrated sending unit. It uses a 12.0-volt electric turbine pump, a round female connector, and a quick-connect outlet layout to support stable fuel flow and accurate fuel level reporting. With a maximum pressure rating of 87.00 and an average flow rating of 32.0, this assembly is built for gasoline fuel systems that call for a premium replacement component. Delphi HP10284 is a practical service part for Ford Mustang and Ford F-150 fuel system repairs when the OE application calls for this exact hanger assembly.
Common Problems This Part Addresses
- Hard starting caused by weak or inconsistent fuel delivery
- Fuel gauge readings that are inaccurate because of a worn sending unit
- Engine hesitation or stalling from low fuel pressure
- Fuel pump noise or failure inside the tank
- Leaks at the tank module seal or outlet connection
Installation Notes and Tips
Confirm the vehicle uses the specific-fit HP10284 configuration before installation. Replace the seal during service, verify the connector shape and terminal count match the original unit, and inspect the tank opening, lines, and electrical connector for wear or corrosion. Because this assembly is in-tank and includes a fuel sending unit, proper alignment of the float arm and secure seating of the hanger are important for accurate operation. Delphi HP10284 should be installed on the correct Ford Mustang or Ford F-150 application only when the OE part number and connector layout match.
Quality Assurance
Delphi has supplied fuel system components to global vehicle manufacturers for decades and brings OE-focused engineering to fuel delivery parts. The HP10284 is built as a premium replacement fuel pump hanger assembly with the components needed for a complete service installation, including the pump, sending unit, strainer, and seal.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||