/live/media/DE/DE_TA1151_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA1151 Steering Tie Rod End - Right Outer
| Brand | Delphi TA1151 |
|---|---|
| Position | Right Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Cone Outside Diameter | 14.2 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 76.6 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 1.654 |
| Length Stud Center to End | 42.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Right Outer |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.787 |
| Tube Diameter | 20.0 |
| Type | Bent |
| Weight | 0.8 |
| Width | 42.0 |
| Fits | Audi · 12 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built for durability with a dust boot and pre-greased design.
Includes mounting hardware. Ready for a straightforward tie rod end installation.
Cross-references Mevotech Supreme MES3260, 101-3917 and 433 419 812C for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Steering Tie Rod End
Delphi TA1151 is a front right outer steering tie rod end built for precise steering response and OE-style fitment. It is listed for select Audi 100, 100 Quattro, 200, and 200 Quattro applications with 14 mm threads, making it a direct-match option for service work on the steering linkage.
- Fits front right outer steering positions on select Audi 100, 100 Quattro, 200, and 200 Quattro models
- Pre-greased design with a dust boot included
- Steel housing and steel tie rod construction with a coated finish
- Bent style with threaded stud design
- Mounting hardware included
- Clockwise thread direction on both ends
- Standard replacement grade for steering service
Detailed Product Overview
Delphi TA1151 is engineered as a steering tie rod end for the front right outer position, with dimensional and material analysis used to support OE-to-aftermarket compatibility. Delphi subjects its steering components to extreme temperature and salt-spray testing, including exposure below -40 degrees C, above 120 degrees C, and 720 hours of salt spray, to verify durability in demanding conditions. This part number is a practical choice for Audi 100 and Audi 200 steering repairs where the original tie rod end shows wear, looseness, or play.
This part cross-references Mevotech Supreme MES3260 for the same application. Delphi TA1151 also cross-references 101-3917 and ES3260 among other listed interchange numbers.
What This Part Helps Address
- Steering wheel play caused by a worn outer tie rod end
- Clunking or looseness in the front steering linkage
- Uneven tire wear related to steering geometry wear
- Imprecise steering feel on Audi 100 and Audi 200 models
- Service replacement for damaged or corroded tie rod hardware
Installation Notes and Fitment
Fits 1989-1991 Audi 100, right outer, 14mm threads, compatible with steering tie rod end. Fits 1989-1991 Audi 100 Quattro, right outer, 14mm threads, compatible with steering tie rod end. Fits 1990-1991 Audi 200, right outer, 14mm threads, compatible with steering tie rod end. Fits 1989-1991 Audi 200 Quattro, right outer, 14mm threads, compatible with steering tie rod end. Fits 1989 Audi 200, right outer.
Verify thread diameter, thread direction, and steering linkage condition before installation. After replacement, a professional wheel alignment is recommended to restore correct steering geometry and tire wear characteristics.
Quality Assurance
Delphi applies OE-focused engineering and validation to its steering portfolio, using dimensional and material checks to support fit and function. The part is built with a coated steel housing, pre-greased construction, and a dust boot for added protection in service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1991 | Audi | 100 | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1991 | Audi | 100 Quattro | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1991 | Audi | 200 | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1991 | Audi | 200 Quattro | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1990 | Audi | 100 | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1990 | Audi | 100 Quattro | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1990 | Audi | 200 | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1990 | Audi | 200 Quattro | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1989 | Audi | 100 | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1989 | Audi | 100 Quattro | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| 1989 | Audi | 200 | Right Outer | — |
| 1989 | Audi | 200 Quattro | Right Outer | 14mm Threads, Compatible with Steering Tie Rod End |
| No rows match your filter. | ||||