/live/media/DE/DE_TA1355_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA1355 Steering Tie Rod End - Inner
| Brand | Delphi TA1355 |
|---|---|
| Position | Inner |
| Adjustable | No |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Gray and Black |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Diameter | 14.0 |
| End 1 Thread Direction | Clockwise |
| End 1 Thread Pitch | 2.0 |
| End 2 Gender | Female |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.25 |
| End 2 Threads Per Inch | 20 |
| Friction Material Thickness | Coated |
| Grade | Premium |
| Grade Type | Standard |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 36.0 |
| Housing Material | High Strength Steel |
| Item Grade | Standard Replacement |
| Length | 290.0 |
| Length Stud Center to End | 9.654 |
| Length Stud Center to End | 245.2 |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Type | Straight |
| Weight | 1.21 |
| Width | 36.0 |
| Fits | Volvo |
OE safety technology. Built with Delphi's OE expertise for aftermarket steering parts.
Coated finish. Helps resist harsh conditions and corrosion.
High-strength steel housing. Adds durability to this straight tie rod end.
Cross-references Beck/Arnley 101-4131, Mevotech Supreme MEV174 and 101-4137 for the same application. See all 8.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA1355 Inner Steering Tie Rod End
Delphi TA1355 is an inner steering tie rod end built for OE-style steering service and dimensional consistency. It is a straight, standard replacement part with a coated finish, pre-greased construction, and high-strength steel housing for dependable steering linkage repair.
Key Features
- Inner steering tie rod end for steering gear and related components
- Straight design with male and female end configuration
- Pre-greased and ready for installation
- High-strength steel housing with coated finish
- Steel tie rod construction with POM bearing material
- Clockwise thread direction on both ends
- Standard replacement, premium grade
Detailed Description
Delphi TA1355 is engineered for drivers and technicians who need a precise inner tie rod replacement that matches OE dimensions and material requirements. Delphi applies its OE steering expertise to the aftermarket, using dimensional and material analysis to support proper fit and consistent steering performance. This part cross-references Beck/Arnley 101-4131 for the same application. It is a direct service part for steering systems on applications such as Honda Civic and other vehicles listed in the catalog fitment data, and Delphi TA1355 is also referenced in the same application family as Mevotech Supreme MEV174.
Common Steering Issues This Part May Address
- Excessive steering play from worn inner tie rod joints
- Loose or imprecise steering response
- Uneven tire wear caused by steering linkage wear
- Clunking or knocking from the steering gear area
- Failed inspection due to worn steering components
Installation Notes and Tips
Verify thread direction, thread diameter, and overall length before installation. Delphi TA1355 is not adjustable and does not include a dust boot or grease fitting, so inspect the surrounding steering components and replace any worn related parts during service. After installation, perform a professional wheel alignment to restore steering geometry and tire wear characteristics. Fits 2006-2011 Honda Civic, inner.
Quality Assurance
Delphi subjects its steering components to extreme temperature and corrosion testing, including sub-zero and high-heat exposure as well as extended salt-spray testing. That validation supports OE-level material and dimensional consistency for the aftermarket steering portfolio. Fits 2006-2011 Honda Civic, inner.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||