/live/media/DE/DE_TA1882_Ang.jpg)
Delphi TA1882 Steering Tie Rod End - Left Inner
| Brand | Delphi TA1882 |
|---|---|
| Position | Left Inner |
| Adjustable | Yes |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Gender | Male |
| End 1 Thread Diameter | 14.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 16.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 40.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 10.551 |
| Length Stud Center to End | 268.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Left Inner |
| Pre-Greased | Yes |
| Tie Rod Material | Steel |
| Tube Diameter | 0.63 |
| Tube Diameter | 16.0 |
| Type | Straight |
| Weight | 1.17 |
| Width | 40.0 |
| Fits | Volkswagen · 1 vehicle |
Standard replacement. Built as an OE-style steering tie rod end for straightforward service.
Coated steel construction. Helps resist corrosion while maintaining a durable steering connection.
Pre-greased design. Ready for installation with mounting hardware included.
Cross-references 701 419 822C and JAR550 for the same application. See all 2.
Delphi TA1882 Steering Tie Rod End
Delphi TA1882 is a straight steering tie rod end built for the front left inner position on the 1999 Volkswagen EuroVan. It combines OE-based dimensional control with a coated steel housing, pre-greased construction, and a standard replacement design for precise steering linkage service.
Key Features
- Fits 1999 Volkswagen EuroVan, front left inner
- Straight tie rod end with male/male end configuration
- Pre-greased and ready for installation
- Coated steel housing and steel tie rod construction
- Adjustable design for steering linkage setup
- Dust boot made from chloroprene rubber (CR)
- Mounting hardware included
- Delphi part number TA1882
Detailed Description
Delphi TA1882 steering tie rod end is engineered as a standard replacement for steering service on the 1999 Volkswagen EuroVan, front left inner. Delphi applies OE-level dimensional and material analysis to help ensure proper fit and consistent steering geometry, while the steel housing, coated finish, and POM bearing material support durable operation in demanding road conditions. The unit is pre-greased, non-greaseable, and uses clockwise thread direction on both ends with a 14.0 mm thread diameter on end 1 and a 16.0 mm thread diameter on end 2. Delphi TA1882 also cross-references Monroe Shocks & Struts 172286 for the same application.
What This Part Helps Address
- Loose or vague steering feel at the front left inner linkage
- Excessive play caused by worn tie rod end joints
- Uneven steering response from damaged steering linkage components
- Noise or clunking from worn steering connection points
- Alignment instability after steering component wear
Installation Notes and Tips
Verify the front left inner position before installation and confirm thread direction, thread diameter, and overall length against the removed part. Because this tie rod end is adjustable, final alignment should be checked after installation to restore correct steering geometry on the Volkswagen EuroVan. Inspect adjacent steering components for wear before completing the repair.
Quality Assurance
Delphi tests steering components across extreme temperature ranges and salt-spray exposure to evaluate durability and corrosion resistance. The brand also uses dimensional and material analysis to support OE-style fitment consistency for the 1999 Volkswagen EuroVan application. Part number TA1882 is built to Delphi’s standard replacement specifications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1999 | Volkswagen | EuroVan | Left Inner | — |
| No rows match your filter. | ||||