/live/media/DE/DE_TA1918_Ang.jpg)
Delphi TA1918 Steering Tie Rod End - Left Outer
| Brand | Delphi TA1918 |
|---|---|
| Position | Left Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Cone Outside Diameter | 15.1 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.472 |
| End 1 Thread Diameter | 12.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.551 |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 71.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 8.661 |
| Length Stud Center to End | 220.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Left Outer |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.846 |
| Tube Diameter | 21.5 |
| Type | Bent |
| Weight | 1.54 |
| Width | 57.7 |
| Fits | Honda · 5 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a dust boot for added protection and durability.
Pre-greased design. Includes mounting hardware for a smoother installation.
Cross-references Mevotech Supreme MES80680, Mevotech Supreme MS60603 and 101-4632 for the same application. See all 9.
OE-Style Steering Tie Rod End for Prelude
Delphi TA1918 is a front left outer steering tie rod end for 1992-1996 Honda Prelude models. It is built as a standard replacement with OE-focused dimensions and materials for precise steering linkage service.
Key Features
- Fits 1992-1996 Honda Prelude, front left outer
- Pre-greased design with no grease fitting
- Dust boot included to help protect the joint
- Steel housing and steel tie rod construction
- Coated gray finish for added surface protection
- Bent style with threaded stud design
- Mounting hardware included
- Delphi part number TA1918
Detailed Description
Delphi TA1918 steering tie rod end is engineered for the front left outer position on the 1992-1996 Honda Prelude. Delphi applies OE-level dimensional and material analysis to support proper fit and steering response, and the part is tested across extreme temperature and corrosion conditions to verify durability. The TA1918 uses a steel housing, plastic bearing material, chloroprene rubber dust boot, and a pre-greased, non-greaseable design for straightforward replacement service. This part cross-references Mevotech Supreme MES80680 for the same application.
Common Steering Issues It Can Address
- Loose or vague steering feel at the front left outer linkage
- Clunking or play from a worn tie rod end
- Uneven tire wear caused by steering linkage wear
- Boot damage that exposes the joint to contamination
- Restoration of steering geometry after component wear
Installation Notes and Tips
Verify the front left outer position before installation and confirm thread direction, thread diameter, and overall dimensions against the removed part. After replacement, perform a professional wheel alignment to restore toe settings and steering wheel centering. Inspect the adjacent steering components for wear before completing the repair.
Quality Assurance
Delphi backs this steering component with OE-focused engineering and validation practices used across its aftermarket steering portfolio. The part is subjected to temperature extremes and extended salt-spray exposure testing to support corrosion resistance and long-term service performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1996 | Honda | Prelude | Left Outer | — |
| 1995 | Honda | Prelude | Left Outer | — |
| 1994 | Honda | Prelude | Left Outer | — |
| 1993 | Honda | Prelude | Left Outer | — |
| 1992 | Honda | Prelude | Left Outer | — |
| No rows match your filter. | ||||