/live/media/DE/DE_TA1976_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA1976 Steering Tie Rod End - Left Outer
| Brand | Delphi TA1976 |
|---|---|
| Position | Left Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Cone Outside Diameter | 15.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.394 |
| End 1 Thread Diameter | 10.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.669 |
| End 2 Thread Diameter | 17.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 76.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 4.252 |
| Length Stud Center to End | 108.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Left Outer, Left Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.945 |
| Tube Diameter | 24.0 |
| Type | Bent |
| Weight | 1.09 |
| Width | 42.5 |
| Fits | Mazda · 23 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a steel housing and tie rod for durable performance.
Pre-greased design. Includes a dust boot and mounting hardware for easier service.
Cross-references Beck/Arnley 101-5196, Mevotech Supreme MS76601 and MOOG Chassis Products ES800026 for the same application. See all 9.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA1976 Steering Tie Rod End
Delphi TA1976 is a front left outer steering tie rod end built for precise steering response and OE-style replacement fit. It is engineered for Mazda 3 and Mazda 5 applications, with materials and sealing details chosen to handle demanding road and weather conditions.
For drivers searching for a Mazda 3 left outer tie rod end or a Mazda 5 front steering tie rod end, this Delphi part number TA1976 provides a direct replacement option with application-specific fitment.
Key Features
- OE replacement steering tie rod end for front left outer positions
- Pre-greased design for ready-to-install service
- Dust boot included to help protect the joint from contamination
- Steel housing and steel tie rod construction
- Coated gray finish for added surface protection
- Bent design with threaded stud connection
- Mounting hardware included
- Standard replacement grade for everyday steering service
Fitment Details
- Fits 2004-2013 Mazda 3, Left Outer
- Fits 2009-2013 Mazda 3 Sport, Left Outer
- Fits 2006-2010 Mazda 5, Left Outer
- Fits 2012-2014 Mazda 5, Left Outer
Detailed Description
Delphi TA1976 is a steering tie rod end for the front left outer position, built to match OE dimensional and material requirements for Mazda steering systems. Delphi applies its aftermarket steering expertise to this part with extensive dimensional and material analysis, helping support proper fit and consistent steering geometry on Mazda 3 and Mazda 5 models. The component uses a steel housing, steel tie rod, plastic bearing material, and a chloroprene rubber dust boot to help protect the joint during service.
This part cross-references MOOG Chassis Products ES800026 for the same application.
What This Part Helps Address
- Loose or vague steering feel at the front left outer linkage
- Uneven tire wear caused by worn steering linkage components
- Clunking or play from a worn tie rod end joint
- Steering pull or alignment instability after component wear
- Contamination-related wear in the steering joint area
Installation Notes and Tips
Confirm the vehicle position before installation, since this part is specific to the front left outer location. After replacement, perform a professional wheel alignment to restore steering geometry and tire wear characteristics. Verify thread direction, thread diameter, and stud fitment against the vehicle’s original component before assembly.
Quality Assurance
Delphi subjects its steering components to extreme temperature and corrosion testing, including sub-zero and high-heat exposure and extended salt-spray evaluation. That testing, along with OE-focused dimensional analysis, supports consistent replacement quality for Mazda 3 and Mazda 5 steering service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Mazda | 5 | Left Outer | — |
| 2013 | Mazda | 3 | Left Outer | — |
| 2013 | Mazda | 3 Sport | Left Outer | — |
| 2013 | Mazda | 5 | Left Outer | — |
| 2012 | Mazda | 3 | Left Outer | — |
| 2012 | Mazda | 3 Sport | Left Outer | — |
| 2012 | Mazda | 5 | Left Outer | — |
| 2011 | Mazda | 3 | Left Outer | — |
| 2011 | Mazda | 3 Sport | Left Outer | — |
| 2010 | Mazda | 3 | Left Outer | — |
| 2010 | Mazda | 3 Sport | Left Outer | — |
| 2010 | Mazda | 5 | Left Outer | — |
| 2009 | Mazda | 3 | Left Outer | — |
| 2009 | Mazda | 3 Sport | Left Outer | — |
| 2009 | Mazda | 5 | Left Outer | — |
| 2008 | Mazda | 3 | Left Outer | — |
| 2008 | Mazda | 5 | Left Outer | — |
| 2007 | Mazda | 3 | Left Outer | — |
| 2007 | Mazda | 5 | Left Outer | — |
| 2006 | Mazda | 3 | Left Outer | — |
| 2006 | Mazda | 5 | Left Outer | — |
| 2005 | Mazda | 3 | Left Outer | — |
| 2004 | Mazda | 3 | Left Outer | — |
| No rows match your filter. | ||||