/live/media/DE/DE_TA1977_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA1977 Steering Tie Rod End - Right Outer
| Brand | Delphi TA1977 |
|---|---|
| Position | Right Outer |
| Adjustable | No |
| Bearing Material | Plastic |
| Color | Gray |
| Cone Outside Diameter | 15.0 |
| Dust Boot Included | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| End 1 Thread Diameter | 0.394 |
| End 1 Thread Diameter | 10.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Female |
| End 2 Thread Diameter | 0.669 |
| End 2 Thread Diameter | 17.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 76.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 4.252 |
| Length Stud Center to End | 108.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Right Outer, Right Outer. For the position specific to your vehicle, refer to the Application tab. |
| Pre-Greased | Yes |
| Stud Type | Threaded |
| Tie Rod Material | Steel |
| Tube Diameter | 0.945 |
| Tube Diameter | 24.0 |
| Type | Bent |
| Weight | 1.09 |
| Width | 42.5 |
| Fits | Mazda · 23 vehicles |
Standard replacement. OE expertise and dimensional analysis help ensure compatibility.
Coated steel construction. Built with a steel housing and tie rod for added durability.
Pre-greased design. Includes a dust boot and mounting hardware for easier service.
Cross-references Beck/Arnley 101-5280, Dorman - OE Solutions 534-807 and Mevotech Supreme MS76602 for the same application. See all 10.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Delphi TA1977 Front Right Outer Tie Rod End
Delphi TA1977 is a standard replacement steering tie rod end built for the front right outer position. It is engineered for Mazda 3, Mazda 3 Sport, and Mazda 5 applications with OE-focused dimensional and material analysis for proper fit and steering response.
Key Features
- Part number: TA1977
- Front right outer steering tie rod end
- Fits Mazda 3, Mazda 3 Sport, and Mazda 5 applications
- Pre-greased design with no grease fitting
- Dust boot included to help protect the joint
- Steel housing and steel tie rod construction
- Coated gray finish for added surface protection
- Clockwise thread direction at both ends
- Mounting hardware included
- Standard replacement grade
Detailed Description
Delphi TA1977 steering tie rod end is built for the front right outer steering position on select Mazda vehicles, including the Mazda 3, Mazda 3 Sport, and Mazda 5. Delphi applies OE-level dimensional and material analysis to help ensure the aftermarket part matches the original steering geometry and installation requirements. The bent design, steel housing, and pre-greased construction support consistent service replacement on daily-driven vehicles.
This part cross-references MOOG Chassis Products ES800025 and Dorman - OE Solutions 534-807 for the same application. If you are replacing a worn outer tie rod end on a Mazda 3 or Mazda 5, TA1977 provides a direct-fit service part for the front right outer position.
What This Part Helps Address
- Loose or vague steering feel at the front right outer linkage
- Clunking or play from a worn tie rod end joint
- Uneven tire wear caused by steering linkage wear
- Steering wheel wander or reduced directional stability
- Inspection failure from excessive steering component movement
Installation Notes and Tips
Install TA1977 at the front right outer position only, and verify vehicle-specific application details before service. Because both ends use clockwise thread direction and the end 2 thread diameter is 17.0 mm, confirm the matching steering linkage dimensions during replacement. After installation, a professional wheel alignment is recommended to restore proper toe settings and steering tracking.
Quality Assurance
Delphi subjects its steering components to extreme temperature and corrosion testing, including exposure below -40 degrees C, above 120 degrees C, and extended salt spray testing. That OE-focused validation supports dependable service on Mazda 3, Mazda 3 Sport, and Mazda 5 steering repairs. Part number TA1977 is built as a standard replacement for consistent fit and function.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Mazda | 5 | Right Outer | — |
| 2013 | Mazda | 3 | Right Outer | — |
| 2013 | Mazda | 3 Sport | Right Outer | — |
| 2013 | Mazda | 5 | Right Outer | — |
| 2012 | Mazda | 3 | Right Outer | — |
| 2012 | Mazda | 3 Sport | Right Outer | — |
| 2012 | Mazda | 5 | Right Outer | — |
| 2011 | Mazda | 3 | Right Outer | — |
| 2011 | Mazda | 3 Sport | Right Outer | — |
| 2010 | Mazda | 3 | Right Outer | — |
| 2010 | Mazda | 3 Sport | Right Outer | — |
| 2010 | Mazda | 5 | Right Outer | — |
| 2009 | Mazda | 3 | Right Outer | — |
| 2009 | Mazda | 3 Sport | Right Outer | — |
| 2009 | Mazda | 5 | Right Outer | — |
| 2008 | Mazda | 3 | Right Outer | — |
| 2008 | Mazda | 5 | Right Outer | — |
| 2007 | Mazda | 3 | Right Outer | — |
| 2007 | Mazda | 5 | Right Outer | — |
| 2006 | Mazda | 3 | Right Outer | — |
| 2006 | Mazda | 5 | Right Outer | — |
| 2005 | Mazda | 3 | Right Outer | — |
| 2004 | Mazda | 3 | Right Outer | — |
| No rows match your filter. | ||||