/live/media/DE/DE_TA2111_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Delphi TA2111 Steering Tie Rod End - Inner
| Brand | Delphi TA2111 |
|---|---|
| Position | Inner |
| Adjustable | Yes |
| Bearing Material | Polyoxymethilen (POM) |
| Color | Black |
| Dust Boot Included | No |
| End 1 Gender | Male |
| End 1 Thread Diameter | 18.0 |
| End 1 Thread Direction | Clockwise |
| End 2 Gender | Male |
| End 2 Thread Diameter | 14.0 |
| End 2 Thread Direction | Clockwise |
| End 2 Thread Pitch | 1.5 |
| Friction Material Thickness | Coated |
| Grease Fitting Included | No |
| Greaseable | No |
| Height | 36.0 |
| Housing Material | Steel |
| Item Grade | Standard Replacement |
| Length Stud Center to End | 4.094 |
| Length Stud Center to End | 104.0 |
| Mounting Hardware Included | Yes |
| Position(s) | Front Inner |
| Pre-Greased | Yes |
| Tie Rod Material | Steel |
| Tube Diameter | 0.571 |
| Tube Diameter | 14.5 |
| Type | Straight |
| Weight | 0.77 |
| Width | 36.0 |
| Fits | Acura and Honda · 15 vehicles |
Standard replacement. OE-focused engineering for dependable steering performance.
Coated steel construction. Helps resist corrosion in demanding conditions.
Adjustable design. Makes alignment setup more flexible during installation.
Cross-references Beck/Arnley 101-5091, Beck/Arnley 101-7741 and Beck/Arnley 101-7742 for the same application. See all 11.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
OE-Style Front Inner Tie Rod End
Delphi TA2111 is a steering tie rod end built for front inner applications on select Acura and Honda models. It combines OE-based dimensional analysis with materials and corrosion testing to support precise steering response and dependable fitment.
- Fits 2004-2008 Acura TL, inner
- Fits 2004-2008 Acura TSX, inner
- Fits 2003-2007 Honda Accord, inner
- Straight, adjustable tie rod end for front inner steering service
- Steel housing and steel tie rod construction with coated finish
- Pre-greased design with no grease fitting and no dust boot included
- Male end configuration with clockwise thread direction on both ends
- Mounting hardware included
Product Details
Delphi TA2111 is a standard replacement steering tie rod end for front inner use on the 2004-2008 Acura TL, 2004-2008 Acura TSX, and 2003-2007 Honda Accord. The part number TA2111 is engineered around OE dimensions and material specifications to help maintain proper steering geometry and consistent alignment performance. Its straight, adjustable design, 14.0 mm end 2 thread diameter, 18.0 mm end 1 thread diameter, and 104.0 mm stud-center length support accurate replacement of the original steering linkage component.
Delphi applies OE safety and durability testing to its aftermarket steering portfolio, including exposure to temperatures below -40 degrees C and above 120 degrees C, plus extended salt-spray testing. This helps validate the part for demanding undercar conditions while preserving compatibility with the original application. This part cross-references MOOG Chassis Products EV80210 and Mevotech Supreme MEV80210 for the same application.
Common Steering Issues This Part Can Address
- Excessive steering play or looseness at the front inner linkage
- Clunking or knocking from worn steering components
- Uneven tire wear caused by steering geometry wear
- Alignment instability after replacing related suspension parts
- Loose or imprecise steering feel in Acura TL, Acura TSX, or Honda Accord applications
Installation Notes
Install TA2111 on the front inner steering position only. Verify thread direction, thread diameter, and overall length against the original part before installation. Because this tie rod end is pre-greased and does not include a grease fitting or dust boot, inspect the surrounding steering components, then perform a professional wheel alignment after replacement. Mounting hardware is included.
Quality Assurance
Delphi uses OE-based engineering, dimensional analysis, and material validation to support aftermarket steering accuracy. The TA2111 is tested for temperature extremes and salt-spray exposure to help confirm durability in real-world driving conditions.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2008 | Acura | TL | Inner | — |
| 2008 | Acura | TSX | Inner | — |
| 2007 | Acura | TL | Inner | — |
| 2007 | Acura | TSX | Inner | — |
| 2007 | Honda | Accord | Inner | — |
| 2006 | Acura | TL | Inner | — |
| 2006 | Acura | TSX | Inner | — |
| 2006 | Honda | Accord | Inner | — |
| 2005 | Acura | TL | Inner | — |
| 2005 | Acura | TSX | Inner | — |
| 2005 | Honda | Accord | Inner | — |
| 2004 | Acura | TL | Inner | — |
| 2004 | Acura | TSX | Inner | — |
| 2004 | Honda | Accord | Inner | — |
| 2003 | Honda | Accord | Inner | — |
| No rows match your filter. | ||||